About the Rockford Fosgate P110S4
With a slick look and strong sound, Punch Stage 1 subwoofers are the way to get the aggressive bass of Rockford Fosgate in your vehicle. The molded polypropylene woofer cone with its foam surround delivers strong, accurate bass. The stamped steel basket is stepped for full woofer excursion, while a 1-1/2" aluminum voice coil is used for reliable power handling.
The P110S4 10" subwoofer handles up to 150 watts RMS, and can be mounted in a sealed or ported box.
Details:- 10" 4-ohm subwoofer
- molded polypropylene woofer cone
- power range: 50-150 watts RMS
- peak power handling: 300 watts
- frequency response: 20-200 Hz
- sensitivity: 85.5 dB
- 4-ohm impedance
- top-mount depth: 4-15/16"
- sealed box volume: 0.65 cubic feet
- ported box volume: 1.25 cubic feet
- Recommended Q-Logic Box Type: 1, 2, 3
- warranty: 1 year
Priced per speaker
What's in the box:
Rockford Fosgate P110S4 owner's manual
- 10" woofer
- 1 Concealing ring
- 4 Self-adhesive foam gasket sections
- Installation and Operation manual (English/French/Spanish/German/Italian)
- "Team RF" window sticker
Customer reviews for Rockford Fosgate P110S4
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate P110S4
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Molded polypropylene | |
Surround Material | Foam | |
Port diameter (inches) | 3 | |
Port length (inches) | 7.3 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
85.5 dB at 1 watt | |
Frequency Response | 20 - 200 Hz | |
Max RMS Power Handling | 150 | |
Peak Power Handling (Watts) | 300 | |
Top Mount Depth (inches) | 4 15/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.18 | |
Frame Length | 10.18 | |
Vas (liters) | 50 | |
Fs (Hz) | 30 | |
Qts | 0.513 | |
Xmax (millimeters) | 7.7 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.65 | |
Minimum Sealed Box Volume (cubic feet) | 0.5 | |
Maximum Sealed Box Volume (cubic feet) | 1 | |
Ideal Ported Box Volume (cubic feet) | 1.25 | |
Minimum Ported Box Volume (cubic feet) | 1 | |
Maximum Ported Box Volume (cubic feet) | 1.5 |
Product Research
Features
Enclosure Compatibility
Woofer: The cone is constructed of molded polypropylene. Polypropylene is lightweight and strong, giving the woofer high power handling and low distortion.
High Excursion Large Roll Surround: A large edge roll surround allows Punch woofers to produce 20% more linear excursion than standard surrounds, resulting in more bass output.
Parabolic Triangular Cone Geometry Support System: By bonding a polypropylene parabolic dust cap of equivalent size to the cone body, a balanced triangular structure is created. This system reduces piston flex and eliminates cone distortion.
Linear Spider: A compliant linear spider improves mechanical stability under high excursion, maintaining consistent excursion characteristics. This eliminates the need for a "break-in period."
Spider Support Ring: This integrated ring increases the bonding surface area between the voice coil former and spider, establishing a stronger joint. The result is increased mechanical power handling under high power/high excursion situations.
Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former's strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
Precision Stamped CRS Basket: Reinforced cold roll steel basket legs dampen unwanted resonance for better bass coupling.
Removable Magnet Cover: The cosmetic magnet cover can be removed when additional mounting clearance is required. With the magnet cover installed, the woofer has the following dimensions:
- Magnet Diameter: 6.976"
- Depth as top: 5.258"
Spring Posts: The heavy-duty spring posts will accept pin connectors and bare wire.
Concealing Ring: Once the subwoofer is mounted, the concealing ring can be installed to hide the mounting screws, giving the subwoofer a finished look. When mounted, the concealing ring adds approximately 3/8" to the woofer's mounting height and approximately 5/8" to the frame diameter.
Recommended Sealed Box Volume: The sealed box sizes recommended by Rockford Fosgate range from 0.5 cu/ft to 1.0 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 0.65 cu/ft, so this is the enclosure recommended by Crutchfield.
Recommended Vented Box Volume: The vented box sizes recommended by Rockford Fosgate range from 1.0 cu/ft to 1.5 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 1.25 cu/ft, so this is the enclosure recommended by Crutchfield. One 3" diameter x 7.3" long port should be used with a 1.25 cu/ft enclosure.
Recommended Single Reflex Bandpass Volume: Rockford Fosgate's enclosure chart lists three compatible bandpass enclosures. The highlighted bandpass enclosure has a sealed chamber volume of 0.65 cu/ft, a vented chamber volume of 0.65 cu/ft and a single 3" diameter x 11" long port. The smallest recommended enclosure has a sealed chamber volume of 0.5 cu/ft, a vented chamber volume of 0.45 cu/ft and a single 3" diameter x 12.75" long port. The largest recommended enclosure has a sealed chamber volume of 0.75 cu/ft, a vented chamber volume of 0.90 cu/ft and a single 3" diameter x 9.25" long port.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I ordered the RF amp + 2 sub package and I must say it is great! Very nice sound for a very nice price! I placed them in a Q-Logic QLH-10D75 Dual 10" Hatchback box and they couldn't be happier. A+++!!
Harley from Oklahoma