About the Sony XS-HF600G
Sony component speaker systems play your music in exquisite detail and with tremendous fidelity. From the smallest whisper of the snare drum to the sharply-defined punch of a bass note, you'll hear and feel your music like never before. The XS-HF600G component system includes 6-1/2" woofers, 1" tweeters, and external 2-way crossovers.
The metal woofer cone and voice coil former are constructed from one piece of aluminum, a design that maximizes heat transfer to the face of the cone the better a speaker disperses heat, the more power it can handle. The lightweight aluminum cone is ultra-rigid, so it withstands large amounts of power without distorting. A die-cast aluminum chassis provides a stable, non-resonant platform for the woofer.
Angle-mount the 1" aluminum dome tweeters for prime imaging, or flush-mount them for a sleek, professional installation. The 2-way, external crossovers (5,000 Hz, 12 dB/octave high- and low-pass) help you squeeze every ounce of performance out of these speakers.
Details:- aluminum woofer cone
- 1" aluminum dome tweeter
- power range 2-60 watts RMS
- peak power handling 180 watts
- external 5,000 Hz crossover networks (12 dB per octave high-pass/low-pass)
- sensitivity 90 dB
- frequency response 30-30,000 Hz
- top-mount depth 2-1/4"
- 2-year warranty
What's in the box:
- 2 Woofers
- 2 Grilles
- 2 Crossovers
- 2 Tweeters (each tweeter is installed in a flush-mount housing and has attached 6.5' speaker leads)
- 2 Tall angle-mount adapters
- 2 Short angle-mount adapters
- 2 Surface-mount adapters
- 2 Mounting brackets
- 12 Self-tapping screws
- 2 Threaded mounting posts
- 2 Wing nuts
- 2 Flat washers
- 2 Lock washers
- 1 Cardboard woofer template
- 1 Cardboard tweeter template (has four separate tweeter cutouts for the different mounting applications)
- Installation/Connections sheet
- Warranty card
Customer reviews for Sony XS-HF600G
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sony XS-HF600G
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Aluminum | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 30 - 30k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 2 1/4 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 1/16 | |
Mounting Height (Inches) | 0.652 | |
Frame Width | 6.237 | |
Frame Length | 6.237 |
Product Research
Woofers: Each speaker has an aluminum woofer cone for clean, accurate bass reproduction and superior power handling.
Surrounds: For a smoother response and superior durability, each woofer uses a rubber surround.
Tweeters: Each tweeter features a 1" aluminum dome for crisp, clear highs.
Tweeter Mounting Options: The tweeters may be flush, surface or angle mounted. Two angle-mount adapters are supplied, one short and one tall.
Tweeter Mounting Dimensions:
Flush Mount | Surface Mount | Angle Mount (tall adapter) | Angle Mount (short adapter) | |
---|---|---|---|---|
Mounting Depth | 1.899" (threaded mounting post depth) | 1.313" (threaded mounting post depth) | 0.875" (threaded mounting post depth) | 1.251" (threaded mounting post depth) |
Mounting Height | 0.461" | 1.047" | 1.435" | 1.043" |
Cutout Diameter | 1.639" | NA | NA | 1.561" |
Frame Diameter | 1.874" | 1.922" | 2.119" | 2.087" |
2-Way Crossovers: Each crossover features a 12dB/octave, 5kHz high-pass network for the tweeter and a 12dB/octave, 5kHz low-pass network for the woofer.
Selectable Tweeter Output Level: Each crossover has a jumper that allows you to select the tweeter output level according to system requirements and personal preference. The jumpers may be set to "-6dB" or "0dB".
Crossover Connections: The crossover inputs and outputs are gold-plated screw terminals.
Mounting: There are two mounting holes in the base of each crossover.
Crossover Dimensions: L=4.713", W=2.563", H=1.041"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...