About the Kicker K60
Some great music, the open highway, and a set of Kicker's K60 6-1/2" speakers it doesn't get much better than that! The sweet-sounding Kaladex dome tweeter broadcasts high frequencies without a trace of harshness. The polygraphite woofer is supported by a ribbed foam surround, supplying full bass and dynamic midrange. Put it all together and you've got lively, accurate car audio.
Product Highlights:
- polygraphite cone with polyester foam surround
- 1" Kaladex (polyethylene naphthalate film) dome tweeter
- frequency response 43-20,000 Hz
- recommended power range 6-65 watts RMS
- peak power handling 130 watts
- sensitivity 90 dB
- top-mount depth 1-7/8"
- 1-year warranty
- MFR # 02K60
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- Two 10' lengths of speaker wire (each length of speaker wire has female quick-slides on one end and bare wire on the other end)
- 8 Speed clips
- 8 Self-tapping screws
- Manual
- Product Registration card
Customer reviews for Kicker K60
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker K60
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Semi-dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Kaladex | |
Woofer Composition | Polygraphite | |
Woofer Surround | Polyester foam | |
Parts Warranty | 1 YEAR | |
Labor Warranty | 1 YEAR | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 43 - 20k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 65 | |
Peak Power Handling (Watts) | 130 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.462 | |
Frame Width | 6.261 | |
Frame Length | 6.261 |
Product Research
Features
CIMP (Curvilinear Injection-Molded Polygraphite) Woofer Cones: The curvilinear injection-molded polygraphite woofer cones provide smooth, extended low frequency response. The cones have a titanium-deposit coating for added strength and a high-performance look.
Polyester Foam Surrounds: Each woofer uses a UV-resistant polyester foam surround for superior durability.
1" Kaladex Semi-dome Tweeters: Each speaker features a 1" Kaladex (polyethylene naphthalate-PEN film) semi-dome tweeter for crisp, clear highs. Kaladex is a polymer film that is rugged and resistant to environmental extremes.
Kapton Voice Coil Formers: The Kapton voice coil formers in the woofers provide exceptional thermal power handling capability.
Felt Damping Plugs: There is a felt damping plug behind each tweeter diaphragm for enhanced transient response.
Ferro-Fluid Cooled Tweeter Voice Coils: Each tweeter voice coil is fluid cooled for greater durability.
Grille Mounting: The supplied grille rings mount under the speakers. If you install the speakers with the grilles, the speaker mounting depth is decreased to 1.788" and the speaker mounting height is increased to 0.567".
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...