About the Pioneer TS-D680R
"Revs" that's what Pioneer calls their full-throttle TS-D Series car speakers. The name reflects a commitment to the aggressive styling and pinned-to-the-red-line prowess you'd find in a decked-out performance car.
The TS-D680R 6"x8" speakers are outfitted with premium materials Aramid fiber, a lightweight but very strong material, creates an extremely rigid woofer cone that responds quickly and accurately. These cones are based on Pioneer's PRS Series speakers (winners in the 2000 IASCA S/Q Finals), and they move big bass with low distortion, even when your system is firing on all cylinders.
The tweeter lens sports a molded "wave guide" that controls the high frequency dispersion pattern for excellent sweet spot imaging. Laminated polyester fiber soft dome tweeters put out crystalline highs, while a built-in rear damping chamber extends midrange response for further refined detail.
The TS-D680Rs are plenty efficient, so you can drive them off a high-powered in-dash receiver's built-in amplifier. But they will perform their best when used in combination with an external amplifier with an RMS wattage rating that falls within the speakers' recommended power range.
Details:- 1-1/8" laminated polyester fiber dome tweeter
- Aramid fiber composite woofer
- durable butyl rubber surround
- frequency response 30-32,000 Hz
- recommended power range 2-60 watts RMS
- peak power handling 250 watts
- sensitivity 91 dB
- top-mount depth 2-13/16"
- 1-year warranty
Priced per pair
What's in the box:
Pioneer TS-D680R owner's manual
- Two 2-way speakers
- 2 Grilles
- Two 13" lengths of speaker wire (each length of speaker wire has quick-slides on one end and bare wire on the other end)
- 8 Self-tapping screws
- 8 Speed clips
- Warranty sheet
- Product Registration card
Customer reviews for Pioneer TS-D680R
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-D680R
Features & specs
General | ||
---|---|---|
Design | 2-way | |
Tweeter Design | 1-1/8" Dome | |
Tweeter Composition | Laminated polyester fiber | |
Woofer Composition | Aramid fiber composite | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity |
91 dB at 1 watt | |
Frequency Response | 30 - 32k Hz | |
RMS Power Range (Watts) | 2-60 | |
Peak Power Handling (Watts) | 250 | |
Impedance (Ohms) | 4 | |
Top-mount Depth (Inches) | 2 13/16 | |
Bottom-mount Depth (Inches) | N/A |
Product Research
Features
Aramid Fiber Composite Cone Woofers: Each speaker features a yellow aramid fiber composite cone woofer. Aramid fiber, a lightweight but very strong material, creates a very rigid cone that provides fast and accurate mid-bass response appropriate for all types of music.
Butyl Rubber Surrounds: For a smoother response and improved durability, the woofers use butyl rubber surrounds.
1-1/8" Laminated Polyester Fiber Dome Tweeters: Each speaker has a 1-1/8" laminated polyester fiber dome tweeter. The specially laminated polyester is very light and gives superior transient response for clear highs. The Wave Guides around the tweeters control dips in the frequency response and the dispersion pattern, resulting in clearer image focus and localization, a deeper soundstage and a wider sweet spot.
Strontium Magnets: The woofers have high-energy strontium magnets.
Built-in 2-Way Crossovers: A 2-way crossover network is attached to each speaker. Each crossover network includes a 3500Hz 6dB/octave low pass filter and a 3500Hz 12dB/octave high pass filter.
Glass-Imide Voice Coil Bobbins: Each speaker has a Glass-Imide Voice Coil Bobbin for higher power handling.
The Pioneer TS-D680R replaces these items
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...