About the JVC RX-6030V / RX-6032V
Home theater power and flexibility are yours with this JVC receiver! It teams up 100 watts x 5 with built-in Dolby® Digital and DTS® decoding to surround you with cinematic sound. Pro Logic® II lets you turn any stereo or Dolby Surround source into convincing 5.1 audio. The multibrand remote controls your other components, and A/V CompuLink simplifies operation with compatible JVC A/V gear.
This model offers digital and analog inputs for DVD, CD, VCR, TV sound, and more. You even get HDTV-compatible component video switching for 2 sources. A 5.1-channel analog input lets you plug in a DVD-Audio or SACD player and immerse yourself in high-resolution, multichannel music. Five DAP (Digital Acoustics Processor) soundfields bring your stereo sources to life.
Details:
- Dolby Digital, DTS, Dolby Pro Logic II
- 100 watts x 2 (stereo) into 8 ohms (40-20,000 Hz) at 0.8% THD or 100 x 5 in surround mode
- JVC AV CompuLink
- subwoofer output
- 5 DAP modes
- component video switching (2 in, 1 out, 35MHz bandwidth)
- digital inputs: 1 optical, 1 coaxial
- 3 audio, 2 A/V inputs (including 2 S-video and one 5.1-channel)
- no phono input
- 1 set main speaker outputs
- fluorescent front-panel display with dimmer
- multibrand-for-video remote
- 30 FM/15 AM presets
- 17-1/16"W x 5-13/16"H x 17-1/16"D
- warranty: 2 years
What's in the box:
JVC RX-6030V / RX-6032V owner's manual
- AM/FM/Dolby Digital/DTS receiver
- RM-SRX6030J Wireless remote control
- 2 "AA" batteries
- AM Loop antenna
- FM wire antenna
- Instructions
- Product Registration Card/Questionnaire
- Important Products Safety Instruction
- Errata sheet
Customer reviews for JVC RX-6030V / RX-6032V
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JVC RX-6030V / RX-6032V
Features & specs
Product Research
Features
Remote Control
Inputs and Outputs Notes
HD Component Video Switching: In addition to composite and S-video switching, this unit can switch between two component video sources. There are 2 component video inputs and 1 component video output; each input and output has female RCA jacks labeled "Y", "PB" and "PR". This feature allows you to connect, and switch between, high resolution video sources equipped with component video outputs. These connections have a wide bandwidth (35 MHz) compatible with HDTV sources.
Surround Modes: This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your audio and video software. The surround modes include:
- Dolby Digital
- Dolby Pro Logic II (Movie and Music)
- DTS
- Live Club
- Dance Club
- Hall
- Pavilion
- All channel stereo
Input Attenuator: You can attenuate an analog input signal if it is too high and causes distortion.
Digital Input Registration: When you use any of the digital inputs, you must register which source is connected to which digital input. This only needs to be done one time, and afterwards, the unit will automatically be able to select the proper source in both digital and analog mode.
Crossover: The channels set to "Small" using bass management are filtered with a selectable high-pass crossover. You can select a crossover point of 80Hz, 100Hz, 120Hz, 150Hz or 200Hz.
LFE Attenuator: When the bass is distorted, you can lower LFE bass output by 10dB.
Dynamic Range Compression: You can choose a Dynamic Range Compression setting of "Mid", "Max" or "Off". The "Mid" setting compresses the dynamic range very little, whereas the "Max" setting offers full dynamic range compression.
Note: Dynamic Range Compression mode is only available when specially encoded Dolby Digital signals are played.
Sleep Timer: This unit is equipped with a sleep timer that will automatically turn the unit off. The sleep timer can be adjusted from 10 to 90 minutes in 10 minute increments.
Dimmer: The display can be dimmed for night use.
RM-SRX6030J IR Wireless Remote: The remote controls JVC audio/video components (CD players, cassette decks, CD recorders, TVs, VCRs and DVD players) and it is pre-programmed to control most popular brands of TVs, cable boxes, VCRs, and DVD players.
Compu Link: JVC's exclusive Compu Link Remote Control System allows you to control other JVC audio/video components through the remote sensor of the receiver. Other benefits of connecting other JVC components to the Compu Link system include automatic source selection, automatic power on/off and synchronized recording. This receiver's remote input cable connections include Compu Link-4 (synchro) and A/V Compu Link-III.
Headphone Jack: This unit has a gold-plated standard 1/4" headphone jack on the front panel.
DVD/5.1-Channel Input: The Audio/Video input labeled "DVD" combines the DVD analog input with the multi-channel input for an external decoder. If you are connecting a DVD player using the stereo analog inputs, you should use the Front Left and Right RCA jacks of this input. If you are connecting an external 5.1-channel decoder or a DVD player with built-in Dolby Digital (and/or DTS) decoding, you should use all 6 RCA jacks (Front L+R, Surround L+R, Center and Subwoofer). In addition to the 6 audio input jacks, there are composite and S-Video jacks.
The JVC RX-6030V / RX-6032V replaces these items
JVC RX-6020VBK
- 100 watts x 5
- DTS, Pro Logic II and Digital Acoustics Processor modes
- 5.1-channel input
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I would probably give it a 5 if I had the remote
kari from Houston ,TX