About the Sony Mobile ES Xplod XS-HF58
Step up to a whole new level of sound with the Mobile ES Xplod XS-HF58 components from Sony. You'll experience the kind of musical detail that you never thought possible in your vehicle you'll come to expect subterranean bass, star-bright highs, and amazing musical subtleties from your system.
These components have all the high-end features you expect from Mobile ES including magnesium alloy woofer cones, 1" magnesium alloy dome tweeters, rubber surrounds, and aluminum die-cast frames. It all adds up to super sound and durability. The two-way 12 dB per octave crossovers pass ultra-clean signal.
Details:
- frequency response 45-25,000 Hz
- power range 2-40 watts RMS
- peak power handling 150 watts
- sensitivity 87 dB
- top-mount depth 2-5/16"
- 2-year warranty
What's in the box:
- 2 woofers
- 2 tweeters
- 2 grilles
- 2 grille frames
- 1- 6.5" strip of dum-dum
- 2 crossovers
- 2 tweeter sleeves
- 2 angle mount cups
- 2 flush mount cups
- 2 flush mount retaining rings
- 8- 30mm self-tapping screws
- 8- 20mm screws
- 4- 25mm self-tapping screws
- 8 speed clips
- 6 crimp-on female quick-slides with rubber insulators (2- 0.205"/4- 0.110")
- 2 crimp-on male quick-slides with rubber insulators (0.110")
- 12- 14/16 gauge crimp-on spade connectors
- 1 surface mount cup template
- 1 flush mount template
- 1 woofer template
- Installation/connections sheet
- Warranty sheet
- Note: Speaker wire not included
Customer reviews for Sony Mobile ES Xplod XS-HF58
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sony Mobile ES Xplod XS-HF58
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Magnesium alloy | |
Woofer Composition | Magnesium alloy | |
Woofer Surround | Rubber | |
Parts Warranty | 2 YEARS | |
Labor Warranty | 2 YEARS | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 45 - 25k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 40 | |
Peak Power Handling (Watts) | 150 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 3/4 | |
Mounting Height (Inches) | 0.4 | |
Frame Width | 5.943 | |
Frame Length | 5.943 |
Product Research
Woofers
Tweeters
Special Features
The silver colored woofer cone (with red dust cap) is made of magnesium alloy. This alloy is a strong and lightweight material and resists flexing. It can also respond quickly for excellent transient response.
A die-cast aluminum woofer basket is used to resist flexing and helps provide rich, clear bass output.
A vented pole piece design provides efficient voice coil cooling and high power handling.
The woofer grilles are gray metal mesh, each with a black, red, white and gold Xplod logo plate. The grille rings are red; when the grilles are used, the grille ring sits recessed into the woofer frame.
The 1" magnesium alloy dome tweeters are fluid cooled for high power handling. Magnesium alloy is used for fast transient response. Each tweeter has a non-removable metal mesh grille attached.
The tweeters may be surface angle mounted or flush mounted. The surface mount cup allows you to select a low-profile surface angle mounting (1.385" mounting height) or a higher-profile mounting (1.608" mounting height). For improved imaging and response, the tweeters can be swiveled in their flush and surface mount cups.
Tweeter Mounting Dimensions:
Angled Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 1.323" or 1.621" (see note in "tweeters" above) | 0.370" |
Depth | (approx. .5" screw depth) | 0.665" |
Base/Ring Diameter | 1.841" | 2.592" |
Cutout | NA | 1.925" |
Crossover Dimensions: 4.706"L x 2.583"W x 1.030"H
Crossover Mounting: There are two holes in the bottom of the crossover that may be used to screw the crossover to a mounting surface (screws included). For access to the screw holes, you must remove the cover by lifting upward on the cover while pressing inward on the sides of the crossover cover.
Crossover Specs: The crossovers have a slope of 12dB/octave (crossover frequency not specified by Sony).
Crossover Connections: Each crossover is equipped with gold-plated screw terminals for all input and output connections.
Crossover Cosmetics: The crossover has a black base with a red top. There is a black, red, white and gold Xplod logo on the crossover top.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...