Features
Specs and Dimensions

Features

Total Speaker Solutions: The TSS-1200 5.1-channel speaker system consists of four identical SAT1200 satellite speakers, a matching CENTER1200 center speaker, and a 250-watt TSS-1200 12" powered subwoofer. If your home theater system is 6.1- or 7.1-channel, you can expand the TSS-1200 system by purchasing additional SAT1200 satellite speakers (item # 108SAT12HP/C). Speaker wire and subwoofer cable are included.

Metal Matrix Diaphragm (M.M.D.): All the speakers in the TSS-1200 system features Infinity's proprietary Metal Matrix Diaphragm (M.M.D.) drivers. M.M.D. features a stiff aluminum core, anodized on both sides for increased strength and rigidity. M.M.D. transducers deliver crystal-clear, distortion-free sound from dynamic digital sources, even at high listening levels.

Acoustical Waveguide: The TSS-1200 satellites and center speaker utilize an acoustical waveguide tweeter design to deliver a wider and more even high frequency response. This ensures that no matter where in the room you sit, you won't miss any of the sound.

SAT1200 Satellites: The four identical SAT1200 satellite speakers each have dual 3-1/2" M.M.D. cone midranges and 3/4" M.M.D. dome tweeters. The acoustic suspension enclosures are made of brushed extruded aluminum. The unique, all-metal construction provides extreme rigidity and internal damping to virtually eliminate resonance, so you hear the music or movie soundtrack just the way it was intended. All four satellite speakers come supplied with a removable table-top stand to allow you to place the speakers on an existing shelf. Recommended Amplifier Power Range: 10-125 watts.

CENTER1200 Center Speaker: The matching CENTER1200 center speaker has dual 3-1/2" M.M.D. cone midranges and a 3/4" M.M.D. tweeter, housed in a brushed extruded aluminum, acoustic suspension enclosure. The CENTER1200 rests on a unique angled pedestal designed specifically for the center speaker. Recommended Amplifier Power Range: 10-125 watts.

5-Way Binding Posts: The satellites speakers use gold-plated, 5-way binding posts for a versatile, secure connection and excellent signal transfer. The binding posts are located on the bottom of the speaker. The center channel also uses gold-plated binding posts that are located on the rear of the speaker but the terminals are too far apart to be considered 5-way.

Mounting Options: The TSS-1200 satellites and center speaker can be placed directly on a shelf using the supplied table-top stands, or mounted on a wall using the supplied fixed or adjustable wall brackets. The adjustable wall brackets allow the speakers to swivel left to right, up or down and diagonally when attached to the wall. The satellites and center speaker have two 1/4"-diameter threaded inserts on the back of the enclosure to accommodate the supplied wall brackets. The satellites also have a 1/4-20 threaded insert on the bottom for use with the supplied table top stand and most optional wall brackets. The satellites have two 0.3mm threaded inserts on the bottom to attach to an optional floor-standing speaker stand (TS-STAND1200, sold separately).

TSS-1200 Powered Subwoofer: The TSS-1200 powered subwoofer features a side-firing 12" M.M.D. cone driver in a bass reflex enclosure with a down-firing port, driven by a 250-watt RMS amplifier. Other features of the subwoofer include:

• Auto Stand-By: When the power switch is in the "on" position, the subwoofer will power on instantly when a signal is detected. The subwoofer will automatically enter the Stand-By mode after approximately 10 minutes when no signal is detected. A front-mounted LED indicates the subwoofer mode (green=On, red=Stand-By)
• LFE/Normal Switch: If you have a Dolby Digital/DTS receiver/processor with a low-frequency-effects (LFE) or subwoofer output, the switch should be placed in the "LFE" position. If your receiver/processor does not have a Dolby Digital/DTS decoder, but has a subwoofer output, the switch should be in the "Normal" position.
• Crossover Adjustment: The TSS-1200 subwoofer has a low-pass crossover that is continuously variable from 50-150 Hz (24dB/octave). The built-in crossover is bypassed when the LFE/Normal switch is in the "LFE" position.
• Phase Control: You can switch the phase control between "0" and "180", whichever setting provides maximum bass output at the listening position.
• Level Control: You can set the overall volume of the subwoofer to achieve the best blend with the rest of the system.
• Line Level Inputs: The subwoofer has left and right RCA line level inputs. If your receiver/preamp has a single subwoofer output, you can use either the left or right channel input--no "Y" adapter is needed.

Colors: The TSS-1200 speaker system is available in a Platinum or Charcoal finish.

Specs and Dimensions

Specifications:

• Frequency Response:
  • SAT1200: 120Hz-20kHz (+/-3dB)
  • CENTER1200: 120Hz-20kHz (+/-3dB)
  • TSS-1200 Subwoofer: 29Hz-150Hz (+/-3dB)

Dimensions:

• Satellite Speaker On Table Top Stand: W = 3.802", H = 12.9375", D = 2.9375"
• Center Speaker On Pedestal Stand: W = 13.125", H = 4.3125" , D = 2.9375"
• Fixed Wall Bracket: The fixed wall bracket attaches the speaker 0.607" from the wall.
• Adjustable Wall Bracket: The adjustable wall bracket attaches the speaker 2.375" from the wall.