About the Kenwood KFC-P708
Kenwood's P Series component speakers present your music as it's meant to be heard full of crisp acoustic detail and low-frequency depth. These lightweight, strong components offer a low-impedance design that draws more power from your in-dash receiver or outboard amplifier, giving you greater volume and impact.
The KFC-P708 component speaker system features 6-3/4" woofers designed with a shallow profile, so they'll fit into more vehicles. Fiber-textured mica-impregnated polypropylene cones hit your bass notes hard, and the rubber surrounds taper in thickness from the basket to the cone, for more effective control over cone movement.
The 1" soft dome tweeters radiate high frequencies effectively, so you'll hear the open, detailed sound that only separate tweeters can provide. You can flush- or surface-mount the tweeters in your car's factory tweeter openings or in any appropriate custom locations to get the best possible stereo image. The external crossovers offer 3-level tweeter attenuation that adjusts high-frequency output for the most natural sound.
Product highlights:
- component speaker system includes 2 woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
- 6-3/4" fiber-textured mica polypropylene woofer
- rubber surround with non-uniform thickness for balanced woofer movement
- 1" UFLC soft dome tweeter
- external crossover with 3-level tweeter attenuation
- impedance: 3 ohms
- power range: 8-65 watts RMS (280 watts peak power)
- frequency response: 30-35,000 Hz
- sensitivity: 91 dB
- mounting rings included for 6-1/2" and 6"x8" and 5"x7" applications
- top-mount depth: 2-1/4"
- warranty: 1 year
- MFR # KFC-P708
What's in the box:
Kenwood KFC-P708 owner's manual
- Two 6-3/4" Woofers
- 2 Metal grilles
- 2 Plastic grille rings
- 2 Tweeters (each tweeter has a 5" Length of wire attached)
- 2 Crossovers
- Two 6-1/2" speaker adapter brackets (includes GM/Chrysler 6-3/4G)
- Two 6x8" speaker adapter brackets
- 2 Flush-mount tweeter housings (installed on tweeters)
- 2 Flush-mount retaining clips
- 2 Tweeter back plates
- Twelve 1" Self-tapping screws
- Four 5/8" Self-tapping screws
- Eight 4mm x 6mm screws
- 2 Wing nuts
- 8 Large speed clips
- 4 Small speed clips
- 8" Strip of Dum-Dum
- Instruction Manual (English/ French/ Spanish)
- Warranty Card
- Templates for woofers and tweeters are on the box
Customer reviews for Kenwood KFC-P708
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KFC-P708
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Soft dome | |
Impedance (Ohms) | 3 | |
Tweeter Composition | UFLC | |
Woofer Composition | Fiber Textured PP | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 30 - 35k Hz | |
Minimum RMS Wattage | 8 | |
Maximum RMS Wattage | 65 | |
Peak Power Handling (Watts) | 280 | |
Top-mount Depth (Inches) | 2 1/4 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 3/8 | |
Mounting Height (Inches) | 0.5625 | |
Frame Width | 6.227 | |
Frame Length | 6.227 |
Product Research
Woofers
Woofers: The 6-3/4" woofer cones are Polypropylene with Fiber Texture and use rubber surrounds added durability and bass response. The woofer basket is designed to fit a standard 4-hole 6-3/4" application. The included round adapter rings expand the woofers' compatibility to include the 3-hole 6-3/4" pattern used by GM and Chrysler, the standard 3-hole 6-1/2" pattern, and Ford's 4-hole 6-1/2" pattern. The included oval adapter rings expand the woofer's compatibility to include a standard 6x8" pattern and a 5x7" Ford/Mazda pattern
Tweeters
UFLC Soft Dome Tweeters: The 1" soft dome tweeters are made from Urethane Film Laminate Cloth for smooth highs and low distortion.
Tweeter Mounting Options: The tweeters can be flush mounted in an aftermarket location using the supplied flush-mount housings and metal retaining-clips. Once installed, the tweeters can be angled horizontally and/or vertically to obtain a better soundstage. In addition, the tweeters can be surface mounted using the supplied surface mount housings. The tweeters can also be top or bottom mounted in a factory installed tweeter location using the surface mount housings. The tweeters do not angle when installed in the surface mount housings.
Flush Mount | Surface Mount (remove both bottom mount and top mount flanges) | Factory Top Mount (remove bottom mount flanges) | Factory Bottom Mount (remove top mount flanges) | |
---|---|---|---|---|
Mounting Depth | 1.883" | 0.554" | 0.525" (mounting screw depth) | 1.017" |
Mounting Height | 0.625" | 0.957" | 1" | 0" |
Cutout Diameter | 1.762" | N/A | 1.695" | 1.663" |
Frame Diameter | 2.002" | 1.705" | 2.625" | 2.654" |
Crossovers
2-Way Crossover Network: Each crossover features a 4.5 kHz high-pass filter for the tweeters and a 4.5 kHz low-pass filter for the woofers.
Input/Output Connections: The passive crossover features eight gold-plated terminal-strip speaker connections. The terminal strip will accommodate bare wire or spade connectors up to 0.273" wide. There are three tweeter connections for different output levels, flat, -2dB, and -4dB to suit system requirements or personal preference.
Mounting: Each crossover can be mounted using two of the included screws through two holes in the casing. To connect and mount the crossovers, the clear plastic cover on top of each crossover must be removed and then re-installed once connections and mounting is completed.
Dimensions: Length = 3.943", Width = 2.687", Height = 1.131"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Excellent choice. Tweeters are smooth and bright. Woofers have a good sound, reasonable amount of midbass with only factory stereo power, and are efficient. These speakers have turned my factory sound around.
JEFF from SHREVEPORT, LA