About the Kicker 10TCVT102
Pickup truck owners swear by their vehicles, from sporty compacts to half-ton construction workhorses, but one thing a pickup doesn't provide is a good place to fit a subwoofer. Kicker developed the loaded CompVT enclosure to bring big bass performance to the tight spots in your truck.
The Kicker 10TCVT102 enclosure features Kicker's CompVT 10" thin subwoofer, which provides impressive bass response with its injection-molded polypropylene cone and ribbed Santoprene rubber surround. The sub's steel basket includes a perimeter venting system that cools the internal parts, so the CompVT will handle up to 400 watts RMS.
The sealed enclosure houses the sub in medium-density fiberboard, while the gray and black carpet covering and emblazoned Kicker logo give the box style for miles. You'll be impressed by how much premium bass can come from an enclosure that measures under 7 inches deep and fits right behind the seat of your pickup.
Product highlights:
- sealed truck-style enclosure with one 10" CompVT shallow subwoofer
- 3/4" medium density fiberboard construction covered with gray and black carpet
- 2-ohm total impedance
- power handling: 50-400 watts RMS (800 watts peak power)
- frequency response: 25-350 Hz
- sensitivity: 97 dB
- 19-5/8"W x 11-5/8"H x 6-3/4"D1 x 3-7/8"D2
- warranty: 1 year
- MFR # 10TCVT102
What's in the box:
Kicker 10TCVT102 owner's manual
- Slim-line subwoofer enclosure with installed 10" woofer
- Instructions booklet
- 2 Yellow logo "KICKER" stickers
Customer reviews for Kicker 10TCVT102
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker 10TCVT102
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Speakers Per Box | --- | |
Woofer Material | IMPP | |
Enclosure Type | Sealed | |
Color | Black/Gray | |
Pieces in System | 1 | |
Width (inches) | 19-11/16 | |
Height (inches) | 11-3/8 | |
Depth (inches) | 6-3/4 | |
Connector Type | Spring posts | |
Frequency Response | 25-350 Hz | |
Power Range (Watts RMS) | 400 | |
Maximum Wattage | 800 | |
Sensitivity | 97 dB | |
Impedance | 2 ohms | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
- Kicker 09TS10C2
- Kicker 08TS10L54
- Kicker 08VS10L72
- Kicker 08TS10L72
- Kicker TC10
- Kicker 09TCVT84
- Kicker 09TCVT82
- Kicker TCVT102
Product Research
Features
Enclosure: The Kicker 10TCVT102 subwoofer sealed-enclosure is specially designed to stand up to harsh automotive environments. The enclosure is made of advanced material and construction techniques to maintain optimal performance for years to come. The inside of the enclosure is computer-modeled and human fine-tuned to offer a high level of bass performance. The box is covered with durable grey carpeting and black vinyl.
Mounting: The Kicker 10TCVT102 enclosure is made to fit behind the seat of a pickup truck, coupe or wherever space is limited and is engineered to provide the best bass response when firing into the back of the seat.
Clearance Plate: The reason the 10TCVT102 enclosure is slim and can fit in tight places is because of a thin metallic Clearance Plate that allows room for the mounted woofers massive magnet and motor structure.
10" Woofer: The Kicker 10TCVT102 enclosure uses a front-firing 10" CompVT subwoofer for loud, pounding bass.
- Spoke Cone: The cone is a modified spoke cone design which helps it fit in this very slim enclosure. The ultra high performance injection molded polypropylene cone remains rigid and minimizes cone flex, lowering harmonic distortion. Distortion in the cone is further reduced with 360° back bracing.
- Ribbed Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
- Basket and Motor Assembly: The high-strength steel basket features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting relieves pressure under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.
- Tinsel Leads: CVT subwoofers use Spiraled tinsel-lead technology, which allows the ideal amount of flex for better strength and durability. The tinsel lead wires are woven into the spider to relieve mechanical stress.
2-Ohm Load: The Kicker 10TCVT102 enclosure is internally wired for a 2 ohm load at the speaker-wire connection terminal. The enclosure's silver-plated, spring loaded, binding posts are located on the left-hand side of the box and can accept up to 12-gauge speaker wire.
Break-in Period: Due to the complex nature of Kicker Comp VT speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
The Kicker 10TCVT102 replaces these items
Kicker 09TS10C2
- sealed truck-style enclosure with one Solo Classic 10" subwoofer
- 2-ohm total impedance
- power handling: 50-450 watts RMS
Kicker 08TS10L54
- ported truck-style enclosure with one 10" L5 Solo-Baric subwoofer
- power handling: 50-450 watts RMS
- frequency response: 24-100 Hz
Kicker 08VS10L72
- ported hatchback-style enclosure with one 10" L7 Solo-Baric subwoofer
- power handling: 50-600 watts RMS
- frequency response: 24-100 Hz
Kicker 08TS10L72
- ported truck-style enclosure with one 10" L7 Solo-Baric subwoofer
- power handling: 50-600 watts RMS
- frequency response: 24-100 Hz
Kicker TC10
- ported truck-style enclosure with one 10" Comp subwoofer
- power handling: 50-150 watts RMS
- frequency response: 30-500 Hz
Kicker 09TCVT84
- 4-ohm total impedance
- power handling: 50-200 watts RMS
- frequency response: 30-350 Hz
Kicker 09TCVT82
- 2-ohm total impedance
- power handling: 50-200 watts RMS
- frequency response: 30-350 Hz
Kicker TCVT102
- sealed truck-style enclosure with one 10" CompVT shallow subwoofer
- 2-ohm total impedance
- frequency response 25-350 Hz
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
It has so much potential in a tuned enclosure. Thinking of designing a T/L enclosure for SPL and a sealed stealth enclosure for everyday. Tempted to get another one or maybe the 12".
Bito from Honolulu, HI