Specials Outlet
MTX 1000XD X Thunder mono subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms

1984 Tercel [remove]

Please measure mounting area to confirm fit
Notes from our Product Research Team (meet the team)

Features
Inputs and Outputs

Features

Mono-Block Amplifier: The MTX 1000XD is designed with specific features to power your subwoofer or subwoofers with a frequency range between 20 to 200 Hz. This amplifier is not designed to power a full-range speaker.

Class-D Design: The 1000XD is a Class D mono-block amplifier, which uses digital switching to amplify audio signals. This design results in high efficiency and less heat.

Aluminum Construction: This X-Thunder amplifier features heavy-duty aluminum construction with large heat sinks, anodized finish, and a large chrome X Thunder badge.

Low-pass Filter: The 1000XD features a variable 40Hz to 200Hz, 24db/Oct low-pass filter to match the frequency response of your connected subwoofer(s).

Bass Boost: The amplifier's bass boost is adjustable from 0-12dB at 40Hz.

Sub-Sonic Filter: This amp features an adjustable 20 to 50Hz, 12dB/octave Sub-Sonic Filter. Ultra-low frequencies that cannot be reproduced by a subwoofer do not become sound but become unnecessary oscillations, which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. Setting the Sub-Sonic Filter between 20Hz to 50Hz cuts the frequencies below the respective frequency to improve the reproduction performance of the speakers by eliminating harmful distortion.

Smart-Engage Speaker Level Input: The 1000XD comes with a set of speaker level input harnesses. This feature makes it easier to add an amplifier to a factory radio or to a receiver with no preamp outputs. When using the speaker-level inputs, the amp automatically turns on when it senses signal from the head unit, eliminating the need for a remote turn-on connection. In many cases, this feature will allow you to install the amplifier without removing your radio.

Remote Bass Knob: The MTX 1000XD comes supplied with a wired remote bass knob which allows you to adjust the bass output of the amplifier. The bass knob is designed to be mounted underneath your vehicle's dash within arm's length so its easily accessible to the driver. The bass knob connects to the amplifier using the supplied 16' cable. The wired remote bass knob measures 2.655" wide x 0.755" tall x 1.955" deep.

Protection Circuits: The 1000XD provides Thermal and Overload protection with LED indicators.

Inputs and Outputs

Power/Ground/Turn-On Connections: The 1000XD features set-screw terminals for the Power, Ground and Remote turn-on lead. The Power and Ground terminals will accommodate up to a 1/0-gauge wire, while the Remote turn-on lead will accept up to a 16-gauge wire.

RCA Inputs: The pair of RCA type inputs will accept either a line-level or speaker-level input signal. The Input Sensitivity control will accept an input signal of 250mV to 5.0 Volts.

Speaker Connections: The amplifier is equipped with a pair of speaker terminals for an easy subwoofer connection. The set-screw speaker terminals will accommodate 12 to 8-gauge speaker wire.

Remote Gain: an RJ-25 connection for connecting the supplied wired remote bass knob.

Fuses: The amplifier is equipped with four 35-amp ATC-type fuses.

No Interest If Paid Within 6 Months*

* Valid on qualifying purchases made between 12/29/09 – 3/31/10 when you use your Sony Financial Services credit card account.
On promo purchase balance, monthly payments required, and no finance charges will be assessed if:
(1) promo purchase balance paid in full in 6 months.
(2) all minimum monthly payments on account paid when due, and
(3) account balance does not exceed credit limit.
Otherwise, promo may be terminated & finance charges assessed from purchase date.

On promotions requiring a minimum payment, payments over the minimum will usually be applied to those promo balances before non-promo and other balances. If you have a non-promo balance, this may reduce the benefit from the promo. If you want to change this payment allocation, please call Customer Service. Standard terms apply to non-promo purchases and optional charges. Promo purchases on existing accounts may not receive full benefit of promo terms, including reduced APR if applicable, if account is subject to delinquency pricing. As of 12/01/09 APR 23.99% and on all accounts in default 29.99%. Minimum Finance Charge $2.00. Subject to approval by GE Money Bank.

Offer subject to termination at any time without prior notice.

MTX 1000XD

X Thunder mono subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms

1 person says: Rating: 5 out of 5
Item #2361000XD
DISCONTINUED

Contact us for advice

Call
Chat
In Stock Alternative

Recommended Accessories

Wiring Kits
Wiring Kits
An amp kit will make your installation simpler and less expensive. Wiring not included with the amp.
Patch Cables
Patch Cables
You'll need a patch cable to get the sound from your radio to your amp. The wiring kits do not include one.
Firewall Bushings
Firewall Bushings
If you drill a hole in your vehicle's firewall for your power cable, guard against corrosion, get a watertight seal, and protect your wiring from chafing against the cut-out.
Capacitors
Capacitors
Protect your charging system and improve your bass response. Ground cable and connectors required (not included).
More Accessories

What's in the box?

Download owner's manual

  • Mono amplifier with four 35A ATC fuses installed
  • 2.5mm Hex wrench
  • 5mm Hex wrench
  • Two 10' speaker-level input wires (with a male RCA plug on one end)
  • Remote gain control module
  • 16' Remote gain control cable (with RJ-25 plugs on each end)
  • Installation guide
  • Amplifier Performance Certificate