Chat
Contact us
Close contact box
Connect ID #
292 174 387 4
Connect ID #
292 174 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Alpine KTP-445 Power Pack Upgrade your Alpine receiver to 45 watts RMS x 4

Item # 500KTP445

Want a simple way to kick up the power of your Alpine receiver? Alpine's "Power Pack" amplifier...

Find what Fits your vehicle

Remove

Checking fit...

Want a simple way to kick up the power of your Alpine receiver? Alpine's "Power Pack" amplifier...

Item # 500KTP445

About the Alpine KTP-445 Power Pack

Zak Billmeier
Want a simple way to kick up the power of your Alpine receiver? Alpine's "Power Pack" amplifier increases your receiver's power output to 45 watts RMS power by 4 channels — plenty of power to drive high-performance speakers or keep up with a big subwoofer amplifier. Best of all, you install the compact Power Pack by plugging it directly into your Alpine receiver's wire harness — no extra wires to run, and no other connections needed.
Alpine Authorized Online Dealer

The KTP-445 connects to any 2005 and newer Alpine headunit that uses a black power harness. It will not work with the CDE-100 receiver.

Want a simple way to kick up the power of your Alpine receiver? Alpine's "Power Pack" amplifier increases your receiver's power output to 45 watts RMS power by 4 channels — plenty of power to drive high-performance speakers or keep up with a big subwoofer amplifier. Best of all, you install the compact Power Pack by plugging it directly into your Alpine receiver's wire harness — no extra wires to run, and no other connections needed.

Note: The KTP-445 Power Pack won't work in systems where an outboard factory amplifier is still active. You'll have to bypass the factory amp if you want to upgrade your power with the KTP-445. Please contact an Advisor at 1-888-955-6000 to check compatibility if you have any questions.

READ LESS

Product highlights:

  • plug-and-play compact Class D amplifier for Alpine in-dash receivers
  • 4-channel amplifier
  • 45 watts RMS x 4 at 4 ohms (CEA-2006 compliant)
  • selectable gain switch (high/low)
  • fuse: 15A
  • 2-9/16"W x 1-1/2"H x 7-13/16"D
  • warranty: 1 year
  • MFR # KTP-445

What's in the box:

  • Head Unit Power Pack (45W x 4 RMS) with attached 38" harness terminated by a male Alpine connector on one end and an attached 29" harness terminated by a female Alpine connector on other end
  • Instructions

Featured video:

Customer reviews for Alpine KTP-445 Power Pack

Loading reviews...

Average review:

4.5 out of 5 stars
98 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

Product Research

Features

Overview: The Alpine KTP-445 Head Unit Power Pack is an easy-to-install power upgrade amplifier that allows you to add higher output and more dynamic response to your Alpine headunit. The KTP-445 amplifies your Alpine headunit's power output, resulting in a 150 percent power increase over the original power from the headunit's built-in amplifier.

Compatibility: The KTP-445 connects to any 2005 and newer Alpine headunit that has a black power harness. Please check with your Crutchfield Product Advisor to confirm compatibility.

Installation: Since the KTP-445 is small and compact, it installs behind your Alpine headunit in the dash of most vehicles. Its plug-and-play connections keep it simple, without requiring additional wiring or special tuning. The male harness connects to the rear plug on your Alpine headunit while the female harness plugs into your Alpine headunit's harness (included with your Alpine headunit). Then connect the wires from the Alpine headunit's harness to your factory harness adapter (sold separately).

Note: The factory radio circuit needs to be a minimum of 15A. If it is not, a separate power and ground will need to be installed for the KTP-445.

Controls: A high/low gain switch on the bottom of the amplifier allows for proper gain settings, whether or not a subwoofer is part of the system.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound