About the Posi-Products™ Wire Connectors
Posi-Tap™ connectors tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the small cap, then tighten for an unprecedented multiple hookup using only one connector.
This package contains an assortment of 6 tap connectors: two for 10- to 14-gauge, two for 14- to 18-gauge, and two for 20- to 22-gauge wires. Warranty: 30 days.
What's in the box:
Posi-Products™ Wire Connectors owner's manual
- 2 Yellow Posi-Tap connectors
- 2 Blue Posi-Tap connectors
- 2 Red Posi-Tap connectors
Customer reviews for Posi-Products™ Wire Connectors
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Posi-Products™ Wire Connectors
Product Research
Features
Posi-Tap Connectors: Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a threaded cap on each end. Just insert the wire to be tapped into the slot in the threads of one cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the hole in the other cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.
Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.
Dimensions:
- Yellow Posi-Tap Connectors: compatible
with 10-12 gauge wire on the Tap end and 12-18 gauge wire on the Accessory
end
- Length: 1.48"
- Maximum Diameter: 0.51"
- Width of Slot in Large Cap (Tap end): 0.15"
- Diameter of Hole in Small Cap (Accessory end): 0.21"
- Blue Posi-Tap Connectors: compatible with 14-18 gauge
wire on the Tap end and 18-24 gauge wire on the Accessory end
- Length: 1.24"
- Maximum Diameter: 0.384"
- Width of Slot in Large Cap (Tap end): 0.1"
- Diameter of Hole in Small Cap (Accessory end): 0.15"
- Red Posi-Tap Connectors: compatible with 18-22 gauge
wire on the Tap end and 18-24 gauge wire on the Accessory end
- Length: 1.015"
- Maximum Diameter: 0.284"
- Width of Slot in Tap end Cap: 0.06"
- Diameter of Hole in Accessory end Cap: 0.125"
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...
Solid connection. Spendy but it feels more secure than other tapping methods. I was too far into the dash and not skilled enough to attempt soldering. This did the trick.
Roger from Flintville, TN