About the Boyo VTL17L
Ready for a backup cam?
Ready for a backup cam?
Boyo secures their VTL17L rear-view camera onto a sturdy strap that stealthily attaches behind any license plate. Once you power the camera and run the included video cable to the screen in your dash, you'll see a plentiful wide-angle view when you're backing up your vehicle. Boyo builds in powerful LED lights to ensure a detailed picture when you're driving at night or in a parking garage, and selectable reverse image and parking lines make this a perfect choice if you want a front camera.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjunction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
Product highlights:
- waterproof CMOS color rear-view camera and bar-style mount with LED lights
- universal fit
- 170-degree wide angle
- selectable reverse image and parking lines
- works in low light
- resolution: 600 TV lines (720 x 480)
- warranty: 1 year
- MFR # VTL17L
What's in the box:
- Backup camera w/ integrated mounting bracket (attached 5' power/video cable)
- Wiring harness (20' video cable/55" power cable)
- Bracket
- RCA male coupler
- Two M6 x 24mm screws
- Two M3 x 12mm screws
- Two-sided tape
- Instructions
- Warranty Card
- Product Registration Card
Customer reviews for Boyo VTL17L
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Boyo VTL17L
Features & specs
Features and Specs | ||
---|---|---|
Camera Type | Rear or Front | |
Resolution | 345,600 | |
Parking Guidelines | Selectable | |
Lux Rating | 0 lux (min) | |
Selectable Views | N | |
Reversed Image | Both | |
Horizontal Viewing Angle | 170 deg | |
Vertical Viewing Angle | N/A | |
Wireless | No | |
Plug type | Composite video |
Product Research
Features
Backup Camera: The Boyo VTL17L is a universal backup camera that can be added to almost any vehicle with an aftermarket receiver that features an integrated video monitor and composite video camera input. The Boyo VTL17L includes a backup camera with an integrated license plate mounting bracket, composite video cable, and power/ground harness.
CMOS Image Sensor & Wide-Angle Lens: The Boyo VTL17L backup camera is equipped with a highly sensitive 1/4" color CMOS image sensor with a total resolution of 720 x 480 pixels. The VTL17L backup camera offers a 170° wide viewing angle.
LEDs: The VTL17L utilizes LEDs along each side of the camera lens for excellent visibility at night. You can defeat the LEDs by removing the jump cap of the green wires labeled " LED light control".
Mirror or Normal Image: By default, the backup camera will display a "mirror" image. If using the VTL17L as a front camera, remove the jumper cap of the white wires labeled "mirror image" to get a non-mirror (normal) image.
Parking Guidelines: The backup camera provides parking assist lines on the screen of your aftermarket display monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also three color-coded (green/yellow/red) horizontal lines that are used to distinguish how close you are getting to the end of the parking spot. If you do not need and want to remove the parking guidelines, then remove the jumper cap of the blue wires labeled "parking lines on/off".
Composite Video Output: The Boyo VTL17L backup camera if fitted with a composite video connector (RCA) which makes it compatible with virtually any in-dash receiver with integrated video monitor and a composite video camera input. The total length of the composite video cable is 20.5'.
Waterproof (IP67): The Boyo VTL17L features a waterproof (IP67) housing to protect it from the elements.
License Plate Mount: The VTL17L features an integrated mounting bracket that is designed to use your vehicle's existing license plate mounting equipment. The integrated bracket is designed to be mounted behind the license plate so that only the camera is visible. Once the camera and bracket are mounted, you can position the camera forward or angle it down. The mounting hole spacing of the license plate bracket is roughly 6.75" to 7" apart.
The Boyo VTL17L replaces these items
Boyo VTL17ir
- universal fit
- selectable reverse image and parking lines
- minimum illumination: 0 Lux
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
This camera was suggested by the Crutchfield rep was easy enough to install and works like a champ. This camera has the backup lines to help judge distance.
Jason from Tucson, AZ