About the Focal FDS 2.350
When size matters
When size matters
If you want an audio upgrade but you're short on room, Focal's FDS 2.350 may be the amp for you. This 2-channel amplifier packs a respectable punch, driving two speakers with 105 watts RMS each even though it's smaller than a paperback book. You can also bridge the amp to mono mode to power a sub with up to 360 watts RMS. The amp's active high-pass filter, low-pass filter, and bass boost let you get hands-on with sound optimization.
Cool under pressure
The FDS 2.350 uses Focal's Direct FET Technology to dissipate heat efficiently from its aluminum chassis, ensuring a robust output and long-term reliability. And speaking of saving space, you can stack this amp with another Focal FDS or FD Series amplifier, great news if you're planning a larger system.
Product highlights:
- compact 2-channel car amplifier
- 105 watts RMS x 2 at 4 ohms (170 watts RMS x 2 at 2 ohms)
- 360 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode)
- CTA-2006 compliant
- Class D design — Direct FET® Technology for efficient heat dissipation
- adjustable low- or high-pass filters (40-400 Hz)
- bass boost (0-12 dB at 85 Hz)
- preamp inputs (RCA) only
- stackable aluminum chassis
- fuse rating: 15A x 2
- wiring and hardware not included with amplifier
- 10-gauge power and ground leads recommended
- dimensions: 7-7/8"W x 1-3/4"H x 4-5/16"D
- warranty: 1 year
- MFR # FDS2.350
What's in the box:
Focal FDS 2.350 owner's manual
- Two-channel amplifier
- Four 15-amp ATM mini-blade fuses (2 installed/ 2 spare)
- 2 Terminal covers (installed)
- Four 2" Self-tapping screws (2.5mm socket cap)
- 2.5mm Allen wrench
- 7 Crimp-on spade connectors - four with red insulators/three with black insulators (14/16 gauge)
- User manual (English/ French)
- Caution sheet
Customer reviews for Focal FDS 2.350
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal FDS 2.350
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
105 x 2 | |
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 170 x 2 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | 360 x 1 | |
Minimum Impedance Bridged | 4 | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 10-50k Hz | |
THD at Rated RMS Power | 1% | |
Signal to Noise Ratio | 84 dB | |
Input Voltage | 14.4v | |
Features | ||
Amplifier Class | D | |
Low-Pass Crossover Frequency | 40-400 Hz | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | 40-400 Hz | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | 0-12 dB | |
Bass Boost Frequency | 85 Hz | |
Fan Cooled | No | |
Fuse Rating | 30 | |
Speaker Level Inputs | No | |
Preamp Outputs | No | |
Width (inches) | 7-7/8 | |
Height (inches) | 1-3/4 | |
Depth (inches) | 4-5/16 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Focal FDS 2.350 is rated at 105 watts RMS x 2 channels.
2Ω Stable: The amplifier can also support a 2Ω load; the 2Ω power output is 170 watts RMS x 2 channels.
Bridgeable: The FDS 2.350 is bridgeable to one channel at 360 watts RMS into 4Ω.
Stackable: All the FD series amps (FDS 2.350, FD 1.350, and FD 4.350) have the same footprint, and can be stacked on top of one another.
Controls
Gain: To accommodate the varying range of signal levels from aftermarket radios, the FDS 2.350 features an adjustable gain control. The input sensitivity of the amplifier ranges from 0.2 to 5.0 volts to the RCA inputs.
Crossover: Set the crossover switch to LPF (Low Pass Filter), Full (full range), or HPF (High Pass Filter). The low pass/high pass crossover point is continuously variable from 40 Hz to 400 Hz.
Bass Boost: The bass boost, centered at 85 Hz, is variable from 0 dB (flat) to +12 dB.
Connections
Power Connections: The power, ground, and turn-on connections are 0.3" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Crimp-on spade connectors are included for all three terminals.
Speaker Outputs: There are 0.3" wide screw terminal outputs for two speakers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Crimp-on spade connectors are included for both speakers.
Line Level Input: The line input is a pair of stereo RCA jacks. The amplifier does not accept speaker level inputs.
Fuses: The amplifier uses two 15-amp ATM mini blade-type fuses.
The Focal FDS 2.350 replaces these items
Focal FD 2.350
- 360 watts RMS x 1 at 4 ohms (bridged mode)
- stackable aluminum chassis
- dimensions: 7-7/8"W x 1-11/16"H x 4-5/16"D
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...