About the BOSS Audio MRH7
A safe harbor for your marine receiver
A safe harbor for your marine receiver
If you want to upgrade the audio system in your boat, but don't have enough space for an "in-dash" receiver, this MRH7 waterproof radio housing from BOSS Audiois the ideal solution. It'll house and protect a wide selection of single-DIN (2" tall) marine receivers, and the universal mounting bracket makes it easy to install in the best spot on your boat.
This rugged, marine-rated housing is made for life on the water. The UV-stabilized ABS plastic housing won't crack or fade in broiling sunlight, while the poly-carbonate tinted front panel and heavy-duty gasket protect your receiver from salt and spray. BOSS Audio even includes external wiring for connecting your power, speakers, and amp, so water can't get in.
Receiver not included.
Product highlights:
- houses and protects single-DIN (2" tall) marine receivers
- poly-carbonate tinted front panel
- UV-resistant exterior
- impact-resistant ABS plastic housing
- sealed with heavy duty gasket
- adjustable universal mounting bracket
- external wiring for power, speakers, and preamp
- receiver not included
- warranty: 1 year
- MFR # MRH7
What's in the box:
BOSS Audio MRH7 owner's manual
- Housing
- Hinged cover
- Wiring/preamp harness
- Bracket
- 2 Knobs
- Rubber gasket
- 2 Foam gaskets
- Six 0.3125" self-tapping screws
- Four 0.625" self-tapping screws
- Four 0.75" self-tapping screws
- Two M4 x 14mm machine screws
- Warranty Card
Customer reviews for BOSS Audio MRH7
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the BOSS Audio MRH7
Product Research
Features
Universal Marine Waterproof Radio Housing & Cover: The Boss MRH7 universal water-resistant radio housing & cover protects your car stereo receiver in marine applications. The MRH7 features a UV stabilized, impact resistant ABS plastic housing which is waterproof sealed with a heavy duty gasket. The MRH7 also features a poly-carbonate tinted, waterproof sealed hinged cover. All hardware is stainless steel and rust proof.
Single-DIN Size: The Boss MRH7 universal water-resistant radio housing & cover fits most single-DIN sized aftermarket marine head units.
Hinged Cover: The MRH7's hinged cover folds down to protect your aftermarket marine head unit and folds up to allow you to access your head unit's front-panel controls.
Mounting Bracket: The Boss MRH7 includes a universal mounting bracket which allows you to attach the water-resistant radio housing & cover to a flat surface of your boat or vessel. Once installed, the bracket lets you angle the housing & cover up and down for better visibility and operation.
Wiring Hookup: The MRH7 universal water-resistant radio housing & cover includes a wiring harness, RCA output, and antenna hook-up for your aftermarket marine receiver.
- Power/Ground: +12V Constant (yellow), +12V Accessory (red), Ground (black)
- Front Speakers: Left Front + (white), Left Front - (white/black), Right Front + (gray), Right Front - (gray/black)
- Rear Speakers: Left Rear + (green), Left Rear - (green/black), Right Rear + (purple), Right Rear- (purple/black)
- RCA Outputs: Two pairs (4-Channel)
- Antenna: Motorola connector
Dimensions:
- Overall: 9.125" (w) x 4.1875" (h) x 10.1875" (d)
- Housing: 9.125" (w) x 4.0625" (h) x 8.3125" (d)
- Cover: 9.125" (w) x 4.1875" (h) x 1.9375" (d)
- Head Unit Opening: 7.165" (w) x 2.075" (h) x 7.365" (d)
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Used this enclosure for a new receiver I installed on our old cabin cruiser. Looks great and does a nice job protecting the radio. Nice quality for the price.
DaveT from Michigan