Features

Compatibility: The SWVL-1 Swivel Bracket is compatible with all MB Quart towers speakers (2014+ ) - including NT1, NT2, and NHT 1 series.

Swivel Mechanism: The SWVL-1 mounting bracket allows you to swivel your compatible MB Quart tower speaker 180 degrees.

Swivel Mount Bracket Installation:

• Detach the driver from the tower speaker's pod housing by loosening the four screws and remove the pre-installed clamp base by loosening its nuts and screws; be mindful of the speaker wiring and remove cautiously.
• Attach the SWVL-1 swivel mount bracket to the tower speaker's pod housing using the supplied longer screws and existing nuts; rotating the top of the swivel mount 90 degrees will give you access the mounting hole and ake sure the adjustment locking screw is pointed toward the rear of the pod.
• Attach the earlier removed clamp base to the installed swivel mount using the previously removed shorter screws and reattach the driver to the tower speaker's pod housing using the already removed four screws.
• Now you are ready to install the tower speaker in the desired location; refer to the tower speaker's manual for the proper installation process.
• Last, fine-tune the desired mounting angle and ecure the placement by tightening the adjustment locking screw located on the base of the SWVL-1 swivel mount bracket.