Custom stereo systems for your Can Am Maverick X3
Bolt-in Rockford Fosgate gear that fits your Maverick without modifications
In a nutshell: This article takes a look at Rockford Fosgate's custom audio systems for the Can-Am Maverick X3.
- Stage 1 – the PMX-2 digital media receiver and custom mounting kit
- Stage 2 – the receiver and a pair of 6-1/2" speakers in custom enclosures
- Stage 3 – adds a 4-channel Rockford Fosgate amp and a 10" subwoofer
- Stage 4 – adds another pair of speakers to the rear rollbar
- Stage 5 – upgrades to a 5-channel amp and adds a second 10" subwoofer
With five stages available, you can choose the system that's right for your music and your Maverick.
There is nothing subtle about the Can-Am Maverick X3. It looks wild, it goes like stink, and it tears through dirt and muck with gleeful abandon. It also costs as much as a car, a trivial fact that will cease to matter the first time you blast over a jump and feel like Wilbur Wright for a few seconds.
There's no sense in applying real-world common sense to a vehicle that combines the best features of a Mazda Miata and a Ford Raptor, anyway. This thing is made for pure off-road fun, whether you’re tearing down a dirt road or racing up a sand dune. Just get in, gas it, and grin like an idiot until it's time to go home, because that's what the Maverick X3 is for.
Anything that's this much fun needs a soundtrack, so why not give your Maverick X3 a stereo system that's as wild as, well, a Maverick X3? Custom-designed sound systems from Rockford Fosgate will fit right into your Maverick, and they'll sound as good as they look. These receivers, speakers, amps, and subs are marine-rated, too, so they can handle whatever dust, muck, and moisture you get into.
Superior sound for your Maverick X3
With five packages to choose from, you can select the audio system that's right for your Maverick X3. Upgrade the radio you already have with the Rockford Fosgate PMX-2 receiver found in Stage 1 (and in the other four stages, too), or go all-out with the awesome array of speakers, subs, and amps in the Stage 5. We'll get to the packages in a bit, but first, let’s take a look at the audio gear Rockford Fosgate has put together.
It all starts with the PMX-2 receiver
The Rockford Fosgate Punch PMX-2 (found in all five packages) packs a lot of features into a compact, water-resistant digital media receiver. This trail-ready stereo has built-in Bluetooth® connectivity, so you can stream music from your phone and crank up your favorites.
If you prefer to plug in, there’s an aux input, plus a USB input that will charge your phone while you’re playing music. And speaking of charges, the PMX-2 also has a low-voltage warning alert built-in, so you won’t accidentally drain your battery.
In addition to AM and FM radio, you can also tune into the weather band to stay up to date on current conditions — a handy feature to have when you’re in the middle of nowhere.
Bigger, better speakers
Rockford Fosgate Prime 6-1/2" speakers (Stage 2 and up) are tough enough for off-road and marine use, but they also sound terrific. The poly cone is treated to withstand moisture and sunlight, as is the 1" volcano dome tweeter in the grille. These full-range speakers give you the performance you expect in a package you won’t have to worry about when the going gets rough.
They’re really easy to install, too, thanks to the direct-fit speaker enclosures included in these kits. Made from a fiber-reinforced composite blend, they bolt right in using the factory mounting holes. No drilling needed!
For top-shelf sound, check out Stages 4 and 5. Stage 4 adds a pair of enclosed RM1652W-MB Prime roll bar speakers, which are marine-rated and really rock. The adjustable clamp rotates for perfect positioning. In Stage 5, you'll have four speakers mounted in upper and lower front enclosures.
Bring on the bass
A 10" subwoofer? In an UTV? You betcha. The Rockford Fosgate RM110D2B subwoofer (found in Stages 3 and 4) fits into your Maverick X3 with help from a direct-fit mounting enclosure (above) that looks like a custom installation. Need even more bottom-end for your tunes? Stage 5 slides a second RM110D2B into the mix for the ultimate in off-road thump.
This Rockford Fosgate subwoofer design is marine-rated and ready for anything, while the bolt-on enclosure is made from a durable composite that blends right into the interior. Your friends will have no idea how much bass you brought to the party until you fire it up.
Powerful amps with plenty of juice
A system like this requires serious power, and the upper stage packages will take care of your speakers, whether you go straight to Stage 5 or add tower speakers later. Stage 4 includes a 4-channel Rockford Fosgate amp, while Stage 5 steps it up to a 5-channel amp (above).
Five stages of Rockford Fosgate sound
With Rockford Fosgate’s high-performance packages, you can get exactly the amount of high-quality audio you want for your Can-Am Maverick X3.
Rockford Fosgate Can-Am Maverick X3 Stage 1 system
Already have speakers? The Stage 1 kit contains a PMX-2 digital media receiver and a custom dash kit. It mounts in place of the center dash using the existing mounting holes.
Rockford Fosgate Can-Am Maverick X3 Stage 2 system
Step up a stage and get the digital media receiver and kit, plus a pair of powerful 6-1/2" speakers, rugged speaker enclosures, and a wiring harness.
Rockford Fosgate Can-Am Maverick X3 Stage 3 system
Now you’re getting serious. Stage 3 adds a 4-channel speaker amp, a 10" sub and enclosure, plus a mounting plate for the amp.
Rockford Fosgate Can-Am Maverick X3 Stage 4 system
Adding a set of 6-1/2" rear roll bar speakers makes this Maverick system kick even harder. You can also buy these speakers separately if you decide to upgrade your Stage 2 or Stage 3 package later.
Rockford Fosgate Can-Am Maverick X3 Stage 5 system
Meet the ultimate in Maverick X3 audio. Two pairs of powerful 6-1/2" speakers combine with two 10" subwoofers and a 5-channel amp to really bring the noise. Includes enclosures and a wiring harness.
Will if fit your Maverick?
That's the next question. Use our vehicle selector to be sure these kits will work with your Can-Am UTV. If you don't have a Maverick X3, we still have a wide selection of audio and lighting gear that'll work for all UTVs. If you have any questions, contact our advisors by phone, chat, or email.