About the Clarion XC2510
Compact powerhouse for the whole system
Compact powerhouse for the whole system
Clarion's XC2510 5-channel amplifier delivers 50 watts RMS to your front and rear speakers while sending up to 300 watts RMS to a sub, all from a chassis that's just slightly larger than your hand. This micro-sized amp can fit almost anywhere, even behind many dashboards. And Clarion managed to pack more watts per square inch inside this little powerhouse than almost any other 5-channel amp made.
Ready for outdoor work
The XC2510's circuits are coated on both sides for protection, so this amp is a great candidate for powering speakers and subs in ATVs, boats, and other challenging applications. Clarion nickel-plated all the connectors to resist corrosion and ensure electrical flow, even during harsh conditions.
The XC2510's input circuitry resists the electronic noise common in cars, so you will enjoy clean, distortion-free music. Soft turn-on and turn-off circuitry prevents potentially damaging thumps to your system as it powers on or off.
Variable high-pass filters help you clarify the sound by eliminating the extremely low bass that your speakers can't reproduce, while a low-pass filter eliminates the higher frequencies from the subwoofer to clean up your bass. A bass boost on the sub channel lets you emphasize the low-end thump. You'll also appreciate the high-level inputs, so you can hook this amp up to almost any system, even to factory radios without RCA connections.
- 5-channel amplifier
- 50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
- 75 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
- 150 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- CEA-2006 compliant
- Class D amp technology
- double-sided conformal-coated circuit board — suitable for power sports and marine applications (not waterproof)
- corrosion-resistant nickel-coated connections
- built-in ground loop isolation circuitry reduces input noise
- variable high-pass filters on front and rear channels (15-250 Hz, 12 dB/octave)
- variable low-pass filters on sub channel (35-250 Hz, 12 dB/octave)
- variable bass boost on sub channel (0-12 dB at 50 Hz)
- preamp and speaker-level inputs
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- fuse rating: 40A x 2
- dimensions: 12-1/4"W x 1-5/8"H x 4-3/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # XC2510
What's in the box:
- 5-Channel amplifier
- Two 40-amp ATO fuses (installed in-line)
- 9" Power/Ground harness
- 9" Speaker-level output harness
- Four 3/4" Self-tapping screws
- 4 Flat washers
- Owner's manual (English/ French/ Spanish)
- Warranty information
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Clarion XC2510 reviews
Thanks for submitting your review
More details on the Clarion XC2510
Features & specs
|RMS Power Output (Watts x Channels)||
50 x 4 |
300 x 1
|Peak Power Output (Watts x Channels)||---|
|Power at 2 Ohms (Watts x Channels)||75 x 4|
|Bridged Power (Watts x Channels)||150 x 2|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||20-30k Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||70 dB|
|Low-Pass Crossover Frequency||35-250 Hz|
|Low-Pass Slope (dB/octave)||12 dB/octave|
|High-Pass Crossover Frequency||15-250 Hz|
|High-Pass Slope (dB/octave)||12 dB/octave|
|Bass Boost||0-12 dB|
|Bass Boost Frequency||50 Hz|
|Speaker Level Inputs||Harness|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
5-Channel Design: The XC2510 is made up of three sections, two full range stereo amps (front and rear) and a subwoofer amp. The front and rear amps are independently bridgeable, meaning the XC2510 can be used as a 5-channel, 4-channel, or 3-channel amp. The minimum impedance for each section is 2Ω, 4Ω when bridged.
RCA Inputs: Three pair of female RCA line level inputs (front, rear, and sub) are attached to the left end of the amp with 7" wires.
Speaker Level Inputs: The 8" speaker level input wires are also attached to the left end of the amp.
Crossovers: The front and rear channels have built-in independent high pass crossovers, the subwoofer channel has a built-in low pass crossover. The high pass crossover points are continuously variable from 15 Hz to 250 Hz and the low pass crossover point is continuously variable from 35 Hz to 250 Hz. The crossover slopes are 12 dB/octave.
Gain: The front, rear, and subwoofer sections have independent continuously variable rotary gain controls; the range depends on which input you're using:
- RCA: 200mV to 8V
- Speaker Level: 600mV to 20V
Bass Boost: The subwoofer amp's bass boost is continuously variable from 0 to +12 dB and centered at 50 Hz, allowing you to dial in the amount of bass according to your personal preference.
Power Harness: The included power harness (two power wires and two ground wires) plugs into a pigtail harness attached to the amp, for a total of 18" power and ground wires. The power wires should be connected directly to the battery, so they will likely need to be extended using an 8-gauge or larger wire (the attached power and ground wires are all 12-gauge). In-line fuse holders on both power wires hold the included 40-amp ATO style fuses. Another in-line fuse should be added close to the battery.
Speaker Output Harness: The included speaker output harness plugs into a pigtail harness attached to the amp, for a total of 18" speaker wires. The remote turn-on wire is also in the speaker output harness.
11 questions already asked