About the Yamaha NS-AW592
Versatile, wall-mountable speakers for indoor or outdoor spaces
Versatile, wall-mountable speakers for indoor or outdoor spaces
Yamaha's NS-A592 speakers sport a rounded, wedge-shape cabinet that fits well in the corner between two walls, or between the wall and the ceiling. An integrated, adjustable bracket lets you mount this pair up out of the way in a variety of configurations. Plus, their weather-resistant design means you can place these speakers outdoors under roof eaves or in other partial-exposure installs.
Each speaker uses a 1" soft-dome tweeter for clear, detailed highs and a waterproof 6-1/2" woofer for mids and bass.
Product highlights:
- rounded, wedge-shaped design is convenient for corner-mounting
- integrated, adjustable bracket allows for a wide range of installation angles
- can be mounted vertically or horizontally
- rubber feet included for placement on a shelf or table
- all-weather design stands up to the elements
- perfect for mounting underneath roof eaves or other partial-exposure installations
- powder-coated aluminum grilles
- 6-1/2" waterproof woofer cone
- 1" soft-dome tweeter
- frequency response: 55-20,000 Hz (-10dB)
- sensitivity: 88 dB
- 6-ohm impedance
- handles up to 50 watts
- spring clip speaker wire connectors
- 8-1/8"W x 13-5/8"H x 6-3/4"D
- weight: 4.4 lbs. each
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # NS-AW592BL
What's in the box:
- 2 Outdoor loudspeakers
- 2 Grilles (pre-installed)
- 2 Brackets
- 4 Knobs
- 8 Self-adhesive ruber feet
- Installation Instructions
- Online Registration Information
- Warranty Sheet
- Warning Note
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Yamaha NS-AW592
Features & specs
| Type | Surface Mount | |
| Bluetooth | No | |
| Enclosure | Sealed | |
| Tweeter Type | Soft-Dome | |
| Tweeter Size (inches) | 1 | |
| Midrange Size (inches) | N/A | |
| Woofer Size (inches) | 6.5 | |
| Woofer Composition | Polypropylene | |
| Woofer Surround | Rubber | |
| Power Range (watts) | up to 50 | |
| Sensitivity | 88 dB | |
| Impedance (ohms) | 6 | |
| Frequency Response | 55-20k Hz | |
| Connector Type | Binding post | |
| Height (inches) | 13-1/4 | |
| Width (inches) | 8-1/8 | |
| Depth (inches) | 7-5/8 | |
| Weight (pounds) | 5.3 | |
| Wall-mountable | Yes | |
| Bracket Included | Adjustable bracket | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Product Research
Features
All-Weather Outdoor Series: The Yamaha NS-AW592 outdoor loudspeaker features an all-weather cabinet (IPX3-Rated) that is drip, water and UV resistant. The weather-resistant enclosure protects the speaker from the elements when mounted outdoors on your porch, patio, or deck. The NS-AW592 also comes with powder-coated aluminum grilles. The NS-AW592 is available in a black or white finish.
Note: The IPX3 rating means the speaker can withstand light water spray, but cannot hold up to heavy water spray or submersion in water.
2-Way Design: The Yamaha NS-AW592 outdoor loudspeaker employs a two-way driver design featuring one 1" balanced-dome tweeter for clear high frequencies and one 6.5" polypropylene cone woofer with rubber surround for accurate mid/ow frequency response.
Acoustic Suspension Enclosure: The NS-AW592 outdoor speaker features an acoustic suspension (sealed) enclosure for tight, accurate bass response.
Binding Posts Terminals: The Yamaha NS-AW592 outdoor loudspeaker is outfitted with a set of binding post speaker terminals that will accommodate bare wire (up to 12 AWG), pin-connectors, spade-lugs, and banana plugs (single only). Banana plugs, spade-lugs, and pin-connectors can only be used when the speaker is table-top mounted. The included wall-mount bracket does not allow enough clearance for the use of banana plugs, spade-lugs, or pin-connectors.
Mounting Options: The Yamaha NS-AW592 outdoor loudspeaker can be table-top mounted or wall-mounted. The supplied wall-mount bracket allows you to vertically mount the all-weather speaker to a wall or ceiling. When wall-mounted, the speaker can be tilted up or down to aim the sound toward your listening area. The bracket can also be used to mount the speaker on a flat table-top surface in a horizontal or vertical orientation. Self-adhesive rubber feet are included to help secure the speaker to your table-top surface and to protect the mounting surface.
- Wall-Mount Dimensions (Vertical Only): 8.25" (w) x 13.25" (h) x 8.375" (d)
- Table-Top Dimensions: The included rubber feet add approximately 0.125" to the overall height of the speaker.
- Vertical (with bracket as stand): 8.25" (w) x 13.75" (h) x 10.125" (d)
- Horizontal (with bracket as stand): 13.25" (w) x 8.25" (h) x 8.375" (d)
- Speaker Only Dimensions: without bracket or stand
- Vertical: 8.125" (w) x 13.25" (h) x 7.625" (d)
- Horizontal: 13.25" (w) x 8.125" (h) x 7.625" (d)
Note: You should mount the speaker under an eve or awning to minimize its exposure to rain and snow.
Loading accessories...
Customer Q&A
Loading articles...
