About the Blaupunkt PCci540
Blaupunkt's Graphite Injected Series PCci540 5-1/4" component speakers bring you the superior performance of separate components without the high price tag. And this special purchase offer means you can upgrade your vehicle's sound system without straining your wallet!
The Graphite Injected Plastic (GIP) woofers combine the rigidity of injected cones with the added strength of lightweight graphite, for tighter bass with less distortion at high listening levels. Position the mylar dome tweeters in the optimum location in your vehicle, and enjoy pinpoint imaging with exceptional high-frequency detail. Blaupunkt's patented Multi-Mount Tweeter assembly offers surface-, angle-, or flush-mount capability for a simplified installation.
The 2-way crossovers (3500 Hz at 12 dB per octave) ensure that each component sees only the frequencies which it was designed to reproduce. The highly-efficient PCci540 system works well with almost any in-dash receiver, yet will thrive on high power from an outboard amplifier.Details:
- 5-1/4" Graphite-Injected Plastic (GIP) woofer
- treated foam surround
- 1/2" mylar dome tweeter
- 2-way crossover (3,500 Hz at 12 dB per octave)
- MMT (Multi-Mount Tweeter) for simple mounting of tweeter in any location
- frequency response 70-22,000 Hz
- recommended power range 2-50 watts RMS
- peak power handling 150 watts
- sensitivity 93 dB
- 2-1/4" top-mount depth
- 1-year warranty
Priced per pair
What's in the box:
- 2 Woofers
- 2 Grilles
- 2 Grille rings
- 2 Crossovers (each crossover has a 15.5' input lead and 46" output leads)
- 2 Tweeters in non-removable surface-mount housings (each tweeter has attached 10" speaker leads)
- 2 Flush-mount cups
- 2 Angle flush-mount cups
- 2 Angle surface-mount cups
- 4 Metal spring clips
- 2 Plastic wire ties
- Eight 1-1/8" self-tapping screws
- Two 3/4" self-tapping screws
- 2 Machine screws
- 2 Lock washers
- 8 Speed clips
Thanks for submitting your review
More details on the Blaupunkt PCci540
Features & specs
|Tweeter Design||1/2" Dome|
|Woofer Composition||Graphite-injected plastic|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||93|
|Frequency Response||70 - 22k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||2 1/4|
|Bottom-mount Depth (Inches)||2 7/16|
|Cutout Diameter or Length (inches)||5|
|Mounting Height (Inches)||0.205|
Graphite-injected Plastic Woofer Cones: The graphite-injected plastic woofer cones are lightweight and mechanically rigid, so they play louder with less power. Acoustically inert, the cones do not "color" the sound of the music, giving you accurate musical reproduction. Each woofer uses a foam surround.
Extended Pole Design: The Extended Pole Design allows for increased cone travel, lower distortion and higher power handling capability.
Mylar Tweeters: Each tweeter features a 1/2" Mylar dome for clean, accurate highs.
"Multi-Mount" Tweeter Mounting System: The "Multi-Mount" tweeter mounting system allows you to flush mount, surface mount, angle flush mount, or angle surface mount the tweeters.
Tweeter Mounting Dimensions:
|Surface-mount||Flush-mount||Angle Flush-mount||Angle Surface-mount|
|Mounting Depth||0.139" (screw depth)||0.778"||0.819"||0.139" (screw depth)|
2-Way Crossovers: Each crossover features a 12dB/octave, 3.5kHz high-pass network for the tweeter and a 12dB/octave, 3.5kHz low-pass network for the woofer.
Crossover Connections: Each crossover has a 15.5' input lead and 46" output leads. The input lead is terminated with bare wire and the output leads are terminated with quick-slides.
Crossover Mounting: The side tabs on each crossover allow you to mount the crossovers using the supplied wire ties.
Crossover Dimensions: L=3.704", W=2.069", H=1.308"