Contact us
Close contact box

Q-Forms Kick Panel Enclosures

Install 6-1/2" components in your 1994-up General Motors SUV or pickup/1996-up Isuzu pickup (1998-2002 Chev S10/1998-99 GMC S15 light gray)

Item # 044C1004A2

Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures...

Find what Fits your car

Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures...

Need help?
Contact our Virginia-based experts.

Item # 044C1004A2

Ships from manufacturer

$199.99 pair

Other options

Add to wishlist

About the Q-Forms Kick Panel Enclosures

Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures to get concert-quality stereo imaging. But why pay hundreds of dollars to an installer when you can do it yourself? Just mount your 6-1/2" component system in Q-Logic's Q-Forms kick panel enclosures, and your car speakers will deliver competition-quality imaging without the expensive price tag.

Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures to get concert-quality stereo imaging. But why pay hundreds of dollars to an installer when you can do it yourself? Just mount your 6-1/2" component system in Q-Logic's Q-Forms kick panel enclosures, and your car speakers will deliver competition-quality imaging without the expensive price tag.

Q-Forms enclosures hold your speakers in an ideal position, angling them to maximize sound quality. Since the Q-Forms are located near your feet, the distance from your ears to each speaker becomes closer to equal, creating a superior soundstage. The driver's seat becomes the "sweet spot" for great stereo sound. Warranty: 1 year.

Note: The Q-Forms do not come with pre-cut holes, so you must cut holes in order to install your component speakers in the enclosures. Installing the Q-Forms panel enclosures in your vehicle may require relocation of the parking brake pedal or other vehicle parts. Please enter your vehicle information or call a Sales Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.

Installation note for 1994-up General Motors SUV or pickup/1996-up Isuzu pickup: To install, bend parking brake pedal about 1-1/2" away from kick panel and relocate computer module.

READ LESS

What's in the box:

  • 2 Pewter plastic Q-Forms
  • 2 Self-tapping screws (Length=1-1/2")
  • Two 1" plastic spacers
  • Two 6 x 8-inch pieces of Polyfil
  • Installation instructions
  • Q-Forms "C-series" instruction sheet
MFR #QL-K1004CA2

Customer reviews

Loading reviews...

Q-Forms Kick Panel Enclosures reviews

Average review:

2 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Not worth the trouble

Kevin (1995 S10 Extreme) from East Brunswick, NJ on 12/2/2014

Verified customer (What's this?)
Verified employee purchase (What's this?)

I have a light duty pickup with just the one bench seat and nothing but the back glass behind the seats, so rear speakers weren't really a viable option; So I saw the kick panel enclosures and thought "heck yea" before I really thought of the real life implications of what putting speakers right next to your feet would mean. I ordered them with a set of infinity 6 & 3/4 in component speakers and installed them the day they got delivered. Now don't get me wrong, the soundstage they deliver in that location is amazing, but as it says in the description, sometimes you have to bend the emergency brake pedal and relocate other things (in my case the computer). After a few days of enjoying the amazing sound they alowed my truck to deliver me, it snowed really heavy here in Jersey and I hopped in my truck with my boots loaded with snow, not even thinking of the speakers at my feet. After getting in and out of my truck all day with snow covered boots, the moisture soaked into the kick panel through the grills and shorted out my system. After looking for hours trying to figure out what happened, I found the problem. So I had to rip out my kick panels and now I was out of all that money I spent to purchase the speakers and the kick panels. I then ordered infinity's 4x6 speakers and mounted them in the dash. The soundstage isn't quiet as good but it's pretty darn close. So before you buy, make sure they will fit your lifestyle.

Pros: Impressive soundstage; easy to install, quality material, easy to alter

Cons: Not a "real life"/ practical location, uncut woofer and tweeter holes, too much hassle make roon for them

Crutchfield response on

3 of 3 found this helpful

Highly recommended, not hard to install.

Michael from Akron, OH on 10/29/2009

Verified customer (What's this?)
Verified employee purchase (What's this?)

I had pondered whether or not to get the kick panels for a long time. I bought the Infinity Ref. 6 1/2 components and at first, had decided to just replace my Infinity coaxials in door. But I figured, I had an extra channel not being used on my Alpine 40 X 4, (50 at 2 ohm) amp and why not just get the kick panel enclosures. The only draw back is the cutting out the installation hole; unless you have a good power saw with an open end, you may end up like me; drilling small holes until it could be punched out! LOL But hey, it worked. I had absolutely no problem at all fitting them, the popped right in, if doing over, I'd find a skinny marking device to fit through the top installation screw hole, but just making it slightly bigger did the job. The sound is phenomenal, with the door speakers, (I have a separate Infinity tweeter custom mounted next to the coax and one in the sail panel), it alleviates the sub in the rear, highs up front problem. The speakers, as directed by the installation guide, have to hang a little under, so it's not a round, pop-in fit, but they look great; don't be discouraged before you're done. I will have kick-panel speakers mounted in every car/truck I ever own from now on, great product.

Pros:

Cons:

Crutchfield response on

6 of 6 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Q-Forms Kick Panel Enclosures

Pat M.

Product Research

Features
Installation Notes

Features

Product Overview: Q-Logic C-Series Q-Form custom kick panels are designed to hold a 2-way component speaker system consisting of a woofer up to 6-1/2" and a tweeter (up to 2" diameter). They are fabricated of durable ABS plastic, color matched to the factory interior colors, and directly replace the factory kick panels. The positioning and angle of the speakers provide optimum stereo imaging and staging.

No Grilles: Because no grilles are included with the Q-Forms, you must use the grilles supplied with the component system. In some cases, the grille could slightly overlap the mounting surface for the woofer. In this case the cutout can be made so any overlap occurs at the back bottom edge where it will not be visible.

Note: One of the included installation guides states that two Q-grilles are included. That is not the case for the C-series Q-Forms.

Compatibility: These Q-Forms are designed to fit select 1994-2004 Chevrolet S-10, Isuzu Hombre, and GMC S-15 and Sonoma pickups, Chevrolet S-10 Blazers, Oldsmobile Bravadas, and GMC Jimmys.

Note: Please enter your vehicle information to verify compatibility.

Factory Colors: These kick panels match the factory Pewter interior trim.

Installation Notes

Installation Overview: You will need to cut out the mounting holes in the designated areas of the plastic Q-Form. A roll of foam tape is provided for sealing the woofer in the kick panel. The tweeter can be flush or surface mounted. Giving exact mounting depths is not possible, since it will depend to some extent on the space available behind the factory kick panel. (Q-Logic advertises 4" minimum.)

Important Modifications: Installation requires bending the parking brake pedal arm (with recommended crescent wrenches) so it is relocated about 1-1/2" to the right. You must also remove the computer module attached to the bulkhead behind the passenger-side kick panel and relocate it to a new position below the glovebox.

Loading accessories...

Customer Q&A

1 question already asked

Q
With a 5 speed truck (i.e. 2002 S10), does this cause major issues with clutch?
[ SPLX2  Oct 22, 2018 ]
2 answers
A
No; you'll just have to bend the parking brake pedal arm so that it is re-located 1.5" to the right. You'll find this information, and more, by clicking the "Details" tab on the kick panel pod's main webpage.
[ Ryan  Oct 31, 2018 ]  Staff
A
I actually didn't keep these I returned them. I'm sorry I wasn't able to be more help.
[ ALFONSO  Oct 26, 2018 ]

Loading articles...

TOP