Maybe not worth the price...
Crutchfield customer from Twin Falls, ID on 3/26/2020
2012 GMC Sierra
Pros: The plastic is bright and shiny. Relatively sturdy plastic. Easy to cut with a dremel cutting bit. Cons: Mounting is difficult to get the screw to align with the hole after pre drilling. Did not at all line up with the factory door sill cover. Had to shave down the bottom to sit flush on the floor, and still didn't even come close to lining up. Will have to cut another hole in the leg to attach the factory door sill cover, or cut off about 3" on the leg of this thing. Kinda disappointing. Quality control was a little off on my units.
Pros:
Cons:
0 of 0 found this helpful
Q-Forms Kick Panel Enclosures
Crutchfield customer from Lafayette, LA on 5/14/2018
2007 Chevrolet Avalanche
Excellent Product, Quick Shipping, easy install!!
Pros:
Cons:
0 of 1 found this helpful
Great sound, possible modification required
Brian from Florence, MA on 2/12/2018
2010 GMC Sierra
Looks amazing, sounds even better. My drivers side form did not fit at all, it was bent in a way that when u put the top in the bottom would push out and vice versa. I have experience installing and know what I'm doing, there was nothing blocking it. Took some heating bending and cutting to get it in and it still is not perfect. Pretty disappointing but the sound they create at high volume made up for it, they really throw the sound around the cab.
Pros: Sound quality boost
Cons: Drivers side form did not fit properly
2 of 2 found this helpful
Great product
Daniel from Bradenton, FL on 2/6/2017
2012 Chevrolet Silverado 1500
Firs good, I didnt have any problems at all. A+ product.
Pros: Works great!
Cons: Cutting the holes.
0 of 0 found this helpful
Q-Forms Kick Panel Enclosures
Crutchfield customer from Stafford, VA on 2/3/2017
It's going to add some much needed depth to sound of my single cab truck. A durable product in comparison to overpaying for a custom fiberglass kit to be fabricated and requires a bit of delicacy due to its location. I can't wait to install it.
Pros:
Cons:
0 of 0 found this helpful
Q-Forms Kick Panel Enclosures
Keith from Redding, CA on 12/24/2016
2009 GMC Sierra
0 of 0 found this helpful
q forms kick panels
paul from raceland Louisiana on 3/19/2015
2008 Chevrolet Avalanche
Product looks cheap and dont fit to well
Pros: Not having to make your own
Cons: They could at least come with the holes cut already
5 of 8 found this helpful
Q-Forms Kick Panel Enclosures
Great product, popped right into the place where the old kick panel was and matched the stock trim perfectly
Pros:
Cons:
4 of 4 found this helpful
Q-Forms Kick Panel Enclosures
Ryan from Ohio on 8/18/2014
2011 Chevrolet Silverado 2500/3500
3 of 3 found this helpful
Look great
Tom R from cypress tx on 2/6/2014
2012 Chevrolet Silverado 1500
look amazing
Pros: Perfect match to my interior
Cons: wish they came precut
3 of 3 found this helpful
kick panels
Crutchfield customer from metairie la on 10/29/2013
Product fit great no problems installing
Pros: seems better made than models from years back
Cons: I wish they offered more colors
2 of 4 found this helpful
Where's the pressure clips, Q-Logic?
sirbOOm from Atlanta, GA on 2/25/2013
The build quality of this is fine enough. I mean, they are stiff enough to get the job done and the color/texture match to my 2011 Silverado is not bad. But these don't have the pressure clips that the stock kick panel has. They actually expect me to drill a hole into the sheet metal of my truck with one single screw. This thing needs more than just a little screw to stay in since you have to literally shove it in to get it into place where it looks remotely like it's supposed to be there. If I hadn't already cut the whole in one of them for the speakers, I would just return these. But now I might as well install them.
Pros: Fits larger-sized 6.5" woofers (like the JBL MS-62C)
Cons: Questionable fit No way to use stock pressure clip holes
18 of 19 found this helpful
