About the Q-Forms Kick Panel Enclosures
Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures to get concert-quality stereo imaging. But why pay hundreds of dollars to an installer when you can do it yourself? Just mount your 6-1/2" component system in Q-Logic's Q-Forms kick panel enclosures, and your car speakers will deliver competition-quality imaging without the expensive price tag.
Q-Forms enclosures hold your speakers in an ideal position, angling them to maximize sound quality. Since the Q-Forms are located near your feet, the distance from your ears to each speaker becomes closer to equal, creating a superior soundstage. The driver's seat becomes the "sweet spot" for great stereo sound. Warranty: 1 year.
Note: The Q-Forms do not come with pre-cut holes, so you must cut holes in order to install your component speakers in the enclosures. Installing the Q-Forms panel enclosures in your vehicle may require relocation of the parking brake pedal or other vehicle parts. Please enter your vehicle information or call a Sales Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.
Installation note for 1989-1995 Toyota Pickup/4Runner: To install, bend parking brake pedal about 1-1/2" away from kick panel and relocate computer module. (Be sure to disconnect car battery before moving computer module.)
What's in the box:
- 2 Gray plastic Q-Forms
- 2 Pieces of Poly-fil batting (8" x 6")
- 41" Length of "U-channel" rubber grille gasket
- Roll of foam tape
- Two 12" Rubber welt sections
- Installation instruction sheet
- Q-Forms "C-series" instruction sheet
Q-Forms Kick Panel Enclosures reviews
didn't fill like it came with everything and when i called them they said it was the other one that came with a grill and everything even the trim was a different color
0 of 0 found this helpful
I have an old Toyota truck and I really didn't want to cut into my door panels. That's the most positive thing that I can say about this product as it installs easily in the kick panels. They don't get in the way of the clutch despit what others say but everyone has different driving styles. The product is sturdy and fit perfectly. There is literally no extra room for the speaker grilles. Perhaps it was the speakers I got but I tried other grilles and not much luck. I modified the install by cutting down some sturdy speaker grilles that I found online and installing it and the speaker from behind rather that on top. It worked out really well and I used speaker foam sealer in between each component. It kept it tight and prevented any unwanted noise. I wrapped wires with foam and added some extra foam for absorption. This looks great and look even more custom as it's not flush, non descript and looks like one solid unit. Be careful not to scratch them when cutting them. The speakers are angled towards you which is much better the in the door panels in my opinion.
Pros: Fits perfectly Didn't have to cut door panels Looks great
Cons: Had to modify because speaker grilles did not fit. If color matched (not black), the paint can wear easily. Be careful when cutting or get black. I feel like the price is a lot for plastic. But I am happy with the end result and would purchase them again if I had to the same job.
1 of 1 found this helpful
Typical Q-Forms quality but these eat up too much space for my 92 toyota pickup with manual transmission. If you have manual you lose too much space for your foot next to the clutch pedal. Im gonna run them until i can get some fiberglass pods made for the door panels.
Pros: Great quality as usual
Cons: not enough space in a manual truck
2 of 2 found this helpful
I used these to install Rockford Fosgate T165-S component speakers in a 1994 Toyota pickup. The plastic is thicker than I thought it would be, so it keeps the speakers firmly in place. They look clean, and are great for those of us not wanting to mount speakers in the door panels. The speaker grille does protrude past the bottom of the panel, but it was not a problem mounting them. You can't even tell once they are installed on the carpet. They may seem a bit pricey, but they are worth the investment.
Pros: Well made, look great.
Cons: Speaker grille is bigger than the location on the panel.
1 of 1 found this helpful
I recieved this product as sent from manufacture. Packaged with poly fill and wheather strip. I always thought these where inclosures but they are just infinate baffles. Had cut trim to fit and cut holes for speakers. May not fit all 6.5" speakers. My alpine type-r's barely fit. I had to modify speaker grill to fit due to mounting surface too small to include grill. Overall performance- great...
Pros: Great for front speaker addition to toyota trucks
Cons: Have to trim to fit. Had carpet and wiring interference issues
1 of 1 found this helpful
I didn't want to cut holes in my doors to accomodate 6.5" inch speakers, so these kick panels were a great alternative. The fit great the color matching was an exact match to my Trucks interiod. 1994 Toyota SR5 4X4 5spd. I was concerned with the clearance around the clutch pedal, but after i got them installed my concerns were gone. They fit great with plenty of space for my feet and I can still use the "Dead Pedal" too. I mounted a set of Polk Audio 6500 speakers in these and they provided an excellent sound stage. Crutchfield was great, ordering online I had my parts in 3 days.
Pros: Good Fit. Good color match. Easy install.
14 of 14 found this helpful
More details on the Q-Forms Kick Panel Enclosures
Product Overview: Q-Logic C-Series Q-Form custom kick panels are designed to hold a 2-way component speaker system consisting of a woofer (up to 6-1/2") and a tweeter (up to 2" diameter). They are fabricated of durable ABS plastic, color matched to the factory interior colors, and replace the factory kick panels. The positioning and angle of the speakers provide optimum stereo imaging and staging.
No Grilles: Because no grilles are included with the Q-Forms, you must use the grilles supplied with the component system. In some cases, the grille could slightly overlap the mounting surface for the woofer. In this case the cutout can be made so any overlap occurs at the back bottom edge where it will not be visible.
Note: One of the included installation guides states that two Q-grilles are included. That is not the case for the C-series Q-Forms.
Compatibility: These Q-Forms are designed to fit select 1989 to 1995 Toyota 4Runners and Pickups. They match the factory Gray interior trim.
Note: Please enter your vehicle information to verify compatibility.
Installation Overview: You will need to cut out the mounting holes in the designated areas of the plastic Q-Form. A roll of foam tape is provided for sealing the woofer in the kick panel. The tweeter can be flush or surface mounted. Giving exact mounting depths is not possible, since it will depend to some extent on the space available behind the factory kick panel. (Q-Logic advertises 4" minimum.)
2 questions already asked