About the Q-Forms Kick Panel Enclosures
Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures to get concert-quality stereo imaging. But why pay hundreds of dollars to an installer when you can do it yourself? Just mount your 6-1/2" component system in Q-Logic's Q-Forms kick panel enclosures, and your car speakers will deliver competition-quality imaging without the expensive price tag.
Q-Forms enclosures hold your speakers in an ideal position, angling them to maximize sound quality. Since the Q-Forms are located near your feet, the distance from your ears to each speaker becomes closer to equal, creating a superior soundstage. The driver's seat becomes the "sweet spot" for great stereo sound. Warranty: 1 year.
Note: The Q-Forms do not come with pre-cut holes, so you must cut holes in order to install your component speakers in the enclosures. Installing the Q-Forms panel enclosures in your vehicle may require relocation of the parking brake pedal or other vehicle parts. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.
What's in the box:
- 2 Black plastic Q-Forms
- Two 1-1/2" Sheet metal screws
- 2 Speed clips
- Two 5/8" Nylon spacers
- 2 Pieces of Polyfil batting (8" x 6")
- Roll of foam tape
- Installation instruction sheet
- Q-Forms "C-series" instruction sheet
Q-Forms Kick Panel Enclosures reviews
Great fit, looks and sounds great
Pros: Matches the interior perfectly
1 of 1 found this helpful
Missed the mark on this one Q-form! This order from Crutchfield came with two kick panels that were for a 2009 Toyota Tacoma. I have more speakers in this truck than factory, and after these were installed I know have a total of 30 throughout the double cab of my Tacoma. The first thing that is completely obvious is that these two kick panels are not the same color as the trucks interior, they are noticeably off on both sides. Not only is it a different shade of gray, the fitment of these two is good until you actually look at the side where it is supposed to butt up against the door. This side is off on both sides, more-so the passenger side than the driver's side. Overall I give this a two out of five starts only because it fits and I didn't have to send it back. This company is making a killing, because I was told after the install that this is normal from this company, and "welcome to the aftermarket world." It is just sloppy Quality Assurance in my book. Q-Forms Kick Panel Enclosures for my truck should be $49.99, not this price. These are junk and will be taken out as soon as I can get some custom kick panels done for the truck.
Cons: doesn't fit, not color matched to interior
10 of 12 found this helpful
More details on the Q-Forms Kick Panel Enclosures
Product Overview: Q-Logic C-Series Q-Form custom kick panels are designed to hold a 2-way component speaker system consisting of a woofer (up to 6-1/2") and a tweeter (up to 2" diameter). They are fabricated of durable ABS plastic, color matched to the factory interior colors, and replace the factory kick panels. The positioning and angle of the speakers provide optimum stereo imaging and staging.
No Grilles: Because no grilles are included with the Q-Forms, you must use the grilles supplied with the component system. In some cases, the grille could slightly overlap the mounting surface for the woofer. In this case the cutout can be made so any overlap occurs at the back bottom edge where it will not be visible.
Note: One of the included installation guides states that two Q-grilles are included. That is not the case for the C-series Q-Forms.
Compatibility: These Q-Forms are designed to fit select 2005 to 2009 Toyota Tacoma pickups. They match the factory Black interior trim.
Note: Please enter your vehicle information to verify compatibility.
Installation Overview: You will need to cut out the mounting holes in the designated areas of the plastic Q-Form. A roll of foam tape is provided for sealing the woofer in the kick panel. The tweeter can be flush or surface mounted. Giving exact mounting depths is not possible, since it will depend to some extent on the space available behind the factory kick panel. (Q-Logic advertises 4" minimum.)
Modifications: The factory dead pedal (foot rest) must be removed to install the driver's side Q-Form.
1 question already asked