About the Q-Customs Factory-fit Subwoofer Enclosures
Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds one 12" Type 1 subwoofer (and two beverages, thanks to the cupholders!), without sacrificing any space.
The photo shows how well this enclosure integrates with the interior of your vehicle. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume is 0.85 cubic feet. Warranty: 1 year.
Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information. Choose the color that matches the model year of your vehicle.
What's in the box:
- One 0.85 cu/ft custom 12" subwoofer enclosure with blue top and side fascias
- 8-1" self-tapping screws
- 1-22" length of speaker wire (terminated with female quick-slides on both ends)
- 1-piece of polyester fiber (20" x 24")
- instruction sheet.
More details on the Q-Customs Factory-fit Subwoofer Enclosures
Features & specs
|Number of Boxes||1|
|Number of Speakers Per Box||1|
|Cutout Diameter or Length (inches)||11 3/16|
|Maximum Speaker Depth (inches)||6-13/16|
|Box Volume (cubic feet)||0.85|
|Second Depth (inches)||0|
|Wood Thickness (inches)||5/8|
|Speaker Wire Connectors||5-way posts|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Compatibility: The enclosure is roughly wedge shaped with blue plastic top and side plates, and it`s bottom is contoured to follow the shape of the floorboard in 94`-98` Dodge Ram full-size extended cab trucks. This enclosure fits under the center portion of the rear seat and extends forward to the backside of the front seat(s). Two cup holders (each has a 2.75" diameter opening) are molded into the top of the enclosure. The top front "corner" of the enclosure is curved/recessed to allow the factory front seat armrest/console to fold up/down without obstruction. The plastic fascias are colored to match the "blue" interior found in some 94`-95` Dodge Ram full-size extended cab trucks. Check the Install Guide for applicable vehicles.
Cosmetics: The enclosure`s top and sides are finished with "blue" molded plastic fascia plates with a wrinkled surface pattern. The main body of the enclosure is made of particle board covered with medium grey/black box carpet. The enclosure has an integrated molded black plastic base that is shaped to allow the enclosure to follow the floorboard contour of the above mentioned vehicles.
Cup-Holders: Molded into the portion of the enclosure top that extends from the front edge of the back seat to the backside of the front seat(s), there is two cup holders (each has a 2.75" diameter opening).
Wiring: The input terminals are gold plated 5-way binding posts with plastic wire retaining nuts. The wire supplied to connect the terminal cup to the woofer is terminated at both ends with 0.210" female quick slides.
Mounting: Even though the enclosure will be held in place by the back seat, transmission hump and the backside of the rear seat, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.
4 questions already asked