About the Q-Forms Kick Panel Enclosures
Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures because that's one of the best ways to get a concert-quality stereo image. But why pay hundreds of dollars to an installer? Mount your 5-1/4" components in Q-Logic's Q-Forms, which deliver competition-quality imaging without the expensive custom installation work.
With Q-Forms, each speaker is located and angled to maximize sound quality. The theory is that the distance between your ears and each of the speakers should be equal. With your speakers in the kick panels, it's like sitting in that "sweet spot" at a concert or right between your home speakers.
All the available colors for the Q-Forms that fit your vehicle are listed here. Pick the color that matches your interior. If there is no match for your vehicle, that means Q-Forms are not available for it. Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information.
Installation note for 1982-1992 Chevrolet Camaro/Pontiac Firebird:
Installation requires the use of a secondary trim piece (included) to match the Q-Logic kick panel to the factory kick plate.
What's in the box:
- 2 Gray plastic Q-Forms
- 2 Gray grille shells
- 2 Plastic trim pieces
- Two 14" sections of rubber welt
- Two 2" sheet metal screws
- Two 1" sheet metal screws
- Two 1.5" plastic spacers
- 2 squares of polyfill batting
- Installation instructions
- (GM name for color is "Medium Dark Gray").
Thanks for submitting your review
More details on the Q-Forms Kick Panel Enclosures
Chevrolet Camaro 82-92, Pontiac Firebird/Trans Am 82-92
- Color matched to interior of your car
- Molded in one piece for factory appearance
- Speakers positioned and angled for optimum stereo staging and imaging
- Equalized path lengths reduce right/left volume bias
- Original kick panel can be replaced if desired
Installation tools required: Crescent wrenches, hole saw (can also use
air saw or keyhole saw), screwdriver
Estimated Installation time: 1.5 hours (per manufacturer)
Tweeter Mounting: The tweeter can be flush or surface mounted, but, if surface mounting, make sure to allow for clearance from obstructions such as the parking brake.
Compatible Speaker Sizes: You can mount a tweeter with a maximum diameter of 2-1/2". The midrange/midbass section of the Q-Forms is made to accept speaker sizes ranging from 3 1/2" to 5 1/4". The maximum frame width/diameter allowable for the midrange/bass driver is 6.125", so a few 6-1/2" units may fit. Our database contains information relating to cutout requirements, frame width, and mounting depth for all of our speakers, so please check with a Crutchfield sales advisor before ordering if you wish to use 6-1/2" speakers in these kick panels.
Allowable Speaker Mounting Depths: Giving exact mounting depths is not possible since it will depend to some extent on the space available behind the factory kick panel, which can vary; however, the minimum flush mount depth is 0 .75" for the tweeter and 2.5" for the woofer/mid bass component.
Hole Cutting Required: Mounting speakers requires cutting the Q-Form plastic. The Q-Forms do not come with precut holes, so holes must be cut to fit the speakers you choose to install in the Q-Forms. If you decide to surface mount tweeters to the Q-Forms, the only holes that must be cut are the ones for the midrange/midbass drivers. If you want to flush mount tweeters to the Q-forms, holes must be cut for the tweeters and midrange/midbass drivers.