About the Q-Forms Kick Panel Enclosures
Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures because that's one of the best ways to get a concert-quality stereo image. But why pay hundreds of dollars to an installer? Mount your 5-1/4" components in Q-Logic's Q-Forms, which deliver competition-quality imaging without the expensive custom installation work.
With Q-Forms, each speaker is located and angled to maximize sound quality. The theory is that the distance between your ears and each of the speakers should be equal. With your speakers in the kick panels, it's like sitting in that "sweet spot" at a concert or right between your home speakers.
All the available colors for the Q-Forms that fit your vehicle are listed here. Pick the color that matches your interior. If there is no match for your vehicle, that means Q-Forms are not available for it.
Installation note for 1992-1995 Honda Civic
The dead pedal (foot rest next to driver's side kick panel) must be removed for this installation.
Q-Forms Kick Panel Enclosures reviews
Thanks for submitting your review
More details on the Q-Forms Kick Panel Enclosures
- Color matched to interior of your car
- Molded in one piece for factory appearance
- Speakers (sold separately) positioned and angled for optimum stereo staging and imaging
- Equalized path lengths reduce right/left volume bias
- Original kick panels can be reinstalled (this is important if you decide to move the Q-Form panels to another vehicle)
Application Guide: 1992-95 Honda Civic
Warning: The dead pedal (foot rest next to driver's side kick panel) on driver's side kick panel must be removed from the vehicle for this installation. The driver's side Q-form obstructs the dead pedal mount, so the dead pedal cannot be used while the Q-Forms are in place.
Allowable Speaker Sizes: This unit allows you to mount a tweeter with a maximum diameter of 2-1/2" and a 3 1/2" to 5 1/4" inch midrange/midbass unit. The maximum cut-out you can make for the midrange/bass unit is 5.9", so a few 6.5" speakers may fit. Make sure to check the specs/features for cut-out and mounting depth of any components you sell.
Speaker Mounting Depths: Giving exact mounting depths is not possible, since it will depend to some extent on the space available behind the factory kick panel. However, the minimum flush mount depth for the tweeter is 0.75" and the minimum depth for the woofer/mid bass component 2.5".
Hole Cutting: Mounting speakers requires cutting holes in the Q-Form plastic. One hole must be cut for each woofer. If the tweeters are to be flush mounted, a hole must be cut for each tweeter.
Tweeter Mounting Options: The tweeters (sold separately) can be flush or surface mounted, but, if surface mounting, make sure to allow for clearance from obstructions such as parking brake.
Installation Tools Required:
- hole saw (can also use air saw or keyhole saw)
Estimated Installation Time: 1.5 hours (per manufacturer)