About the Q-Logic QLT-1.0010SE
Q-Logic enclosures take the guesswork out of box-building, so you can enjoy great bass without the time-consuming process of constructing your own enclosure. The QLT-1.0010SE accommodates one 10" subwoofer in a sturdy housing made entirely of non-resonant medium-density fiberboard. This box features reliable locking-joint construction, and is impeccably upholstered with durable gray carpet.
Since subwoofers' basket design and bolt patterns vary by brand, Q-Logic's ingenious QxE seal ring allows you to customize the box opening for virtually every woofer available. Plus, a cool-looking, one-piece grille works even with woofers that have large roll surrounds, so you get solid protection and sharp looks.
The box comes with a round, pressure-fit grille, gold-plated binding posts, and speaker leads with attached quick-slides for easy connection to your woofer.
This box is designed to fit behind the seat in your pickup. Some truck boxes may not fit in a standard cab with the seat pushed all the way back, so please measure the planned installation area to ensure fit.Key Specifications:
- for one 10" subwoofer
- 1.0 cubic feet internal volume
- width: 26-3/8"
- height: 14-5/8"
- bottom depth: 8-3/8"
- top depth: 6"
- 1-year warranty
What's in the box:
- Single truck-style enclosure
- Plastic grille
- Two 1-1/2" self-tapping screws (installed in grille)
- QxE-Ring (installed)
- 2' length of speaker wire (with 0.205" female quick slides on both ends)
- Eight 1" self-tapping screws
- Port plug (installed)
- Cardboard port (3" diameter x 12" length)
- Instructions/Port Tuning Chart/Warranty sheet
Thanks for submitting your review
More details on the Q-Logic QLT-1.0010SE
Features & specs
|Number of Boxes||1|
|Number of Speakers Per Box||1|
|Cutout Diameter or Length (inches)||9 3/8|
|Maximum Speaker Depth (inches)||6-1/16|
|Box Volume (cubic feet)||1|
|Second Depth (inches)||6|
|Wood Thickness (inches)||5/8|
|Speaker Wire Connectors||Spring Post|
|Box Color||Dark Gray|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Materials: The box is constructed of 5/8" MDF (medium-density fiberboard), with a second MDF panel adhered to the back of the front panel to provide the mounting surface for the woofer. MDF resists flexing and has anti-resonant qualities.
Design: For strength, Q-Logic uses a full dado groove on the front, back, top, and bottom panels. The side panels are glued, then locked into these grooves. The edges of the front, back, top and bottom use mitered joints, so there's 50% more surface area for the special glue that bonds them. The side panels of the box are recessed 0.5". The enclosure is covered with durable gray carpet.
QxE-Ring: The QxE-Ring is a multi-diameter woofer mounting adapter which also seals the woofer into the enclosure. The QxE-Ring has a series of rings around the outside to help center the woofer, and hash marks to help align the woofer's mounting holes. If the mounting diameter of the woofer is 9-1/4" or less, the woofer can be installed without trimming. For woofers with a larger mounting diameter, a portion of the QxE-Ring can be trimmed off, allowing for an extra 1/8" in woofer mounting diameter.
Pre-cut Port Hole: The box comes as a single-compartment sealed enclosure, but includes a pre-cut port hole on the top panel, covered by a black plastic port plug and a silver elliptical plastic port flange. The flange is held in place by three Philips head screws. The instruction sheet provides a port tuning chart and guidelines on the proper length to cut the port (a 3" diameter x 12" port is supplied). Porting the box requires removing the port flange and plug, trimming the port to the proper length, slipping the port tube onto the fluted port flange, inserting the port tube from the outside of the enclosure, and the port flange secured into place. The port plug should be saved in case you want to change back to a sealed enclosure.
Plastic Grille: The one-piece plastic grille fits into outer edges of the enclosure opening and is held in place with two self-tapping screws. The grille offers nearly an inch of "headroom" to accommodate woofers with large roll surrounds. Note: The grille adds approximately 3/8" to the overall depth of the enclosure when mounted.
External "Top Hat": Mounted to the rear of the enclosure, the External Top Hat is an oval-shaped plastic insert which extends the woofer mounting depth by nearly 3/4", allowing more woofers to fit into the enclosure. The cutout for the insert is 7-1/2" wide and 6" high. The external panel is 9-1/4" x 7-5/8" (oval), but protrudes less than 1/4" from the back panel.
The spring posts, located on the rear of the enclosure, will accept bare wire,
pin connectors, banana plugs, and dual banana plugs.
Brackets: Brackets (not included) are recommended for more secure mounting.
The Q-Logic QLT-1.0010SE replaces these items