About the MB Quart NT1-120L
Big sound and lighting for land or sea
Big sound and lighting for land or sea
MB Quart's NK1-120L speaker (sold individually) brings outstanding performance and marine-rated durability to your weekend adventures. This tough tower speaker is encased in a strong, lightweight ABS enclosure that protects the speaker while also improving volume and bass response – exactly what you want on your ski boat or ATV. You can control its built-in LED lights with the optional N1-RC remote. Your color choices are almost limitless, and you can even create strobe effects and and programmed “light shows." Install as many speakers as you like on a larger boat or off-road vehicle — the remote can control all of them.
Quality components for impressive performance
You're buying marine speakers because you demand the best possible sound wherever you go. MB Quart Nautic speakers give you what you want, with quality components and thoughtful design. The 8" woofer's UV-resistant polypropylene cone is attached to the frame with a durable butyl rubber surround and stabilized with a woven aramid fiber spider that resists weather-and temperature related degradation.
MB Quart mounts the 1" titanium dome tweeter securely in the grille for superior high-frequency dispersion. These efficient speakers deliver maximum output using minimal amplifier power.
Rugged speakers that rock
These MB Quart speakers will perform in extreme conditions, with water-resistant components and super-strong composite baskets, magnet covers and grilles. The exterior surfaces are coated with special UV-resistant paint that stands up to broiling sunlight. Inside, the crossover network is conformal-coated to protect against fresh and salt water spray, not to mention dust and sand. In fact, your MB Quart speakers are IPX67-rated, which means they meet the highest standards of weather resistance.
The package includes 11 hardware mounting options, ranging from 1-1/2" to 2-3/4". A centering ring allows the speakers to tip left or right when mounted to an arced mount. A steel mounting plate between the pipe mount and the enclosure adds additional strength. All mounting hardware is die-cast for strength and powder-coated to withstand damaging sunlight, spray, and dust.
More about MB Quart
Three decades of marine and powersports audio expertise goes into MB Quart's Nautic line. These rugged, high-quality receivers, speakers, amps, and subs provide great sound and rugged, all-weather reliability. The MB Quart "Life Shield" badge means your gear has been designed and tested to stand up to the toughest conditions on the water or off the beaten path.
- 8" marine/off-road tower speaker with LED lighting (sold as individual units)
- heavy-duty ABS cast enclosure
- powder-coated die-cast mounts
- 11 mounting options fit a variety of towers and roll bars
- polypropylene woofer with rubber surround
- 1" titanium tweeter
- water-resistant aramid fiber spider
- IPx67 certified for marine or off-road use
- lightweight composite frame
- UV- and salt water-resistant
- power range: 2-70 watts RMS (140 watts peak power)
- frequency response: 70-22,000 Hz
- impedance: 4 ohms
- sensitivity: 92 dB
- enclosure length: 11-1/4"
- enclosure height: 8-7/16"
- hanging height: 9"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # NT1-120L
What's in the box:
- Wake tower speaker w/ illumination (attached 7" speaker wire)
- Mounting bracket w/ 4 screws (pre-installed)
- 9 Two-piece rubber adapters
- 2 One-piece rubber adapters
- 4 Butt-connectors
- Quick Start Installation Guide
- Mounting clamp label sheet
MB Quart NT1-120L reviews
Thanks for submitting your review
More details on the MB Quart NT1-120L
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
92 dB at 1 watt |
|Max RMS Power Handling||70|
|Peak Power Handling (Watts)||140|
Marine & Powersports Tower Speaker: The NT1 marine and powersports tower speaker is designed to sound great while playing very loud in the outdoors on your boat or off-road vehicle. The tower speaker's enclosure is sealed against the elements and features internal steel reinforcement for strength. The tower speaker features water resistant (IPX67) components; including titanium tweeter, polypropylene, and rust-resistant internal connectors. The tower speaker even offers built-in illumination with a pre-programmed demo mode.
Titanium Tweeter: The NT1 tower speaker features a 1" Titanium dome tweeter which delivers a very smooth musical response and high output with minimal required amplifier power.
Polypropylene Woofer: The NT1 tower speaker features a UV protected, water resistant 8" composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame. The woofer's voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight. Its high energy strontium ferrite magnet provides higher output with minimal amplifier power. This woofer design delivers deep bass & high volume while being protected from sun, sand, & water spray.
Marine Certified Crossover: The NT1 tower speaker utilizes a conformal coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection.
Injection Molded Enclosure & Grille: The NT1 tower speaker is built to last with a heavy-duty ABS cast enclosure that features steel reinforcements. This ruggedly design enclosure is sealed to provided better protection from the elements and improved bass response. The ABS cast grille is integrated into the speaker to help seal the assembly which adds to the protection against the elements. The speaker frame and integrated grill are also UV protected which will help prevent color fade.
Speaker Wire: The NT1 tower speaker features an attached 7" speaker wire with bare-tinned wire on the other end and comes with two butt-connectors that can be crimped onto your amplifier's speaker wire. The solid black wire is negative, while the black with white stripe wire is positive.
Mounting Options: The included mounting hardware includes practically every conceivable tower and roll-cage size option, so there is no need to purchase extra equipment. Eleven mounting hardware options from 1.5" to 2.75" are included. The mounting hardware are Die-Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust. The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength. The Centering ring allows the speaker to tip left/right when mounted to an arced mount which means regardless of the angle of your tower or roll-cage, the speaker is always straight. Additionally, the NT1 tower speaker has been engineered to have less of the enclosure hanging below the mount, which means fewer friends & family bumping their heads on the speaker.
Illumination + Optional Remote: The NT1 tower speaker features built-in variable illumination. There is 12-volt Positive (Red) and Ground (Black) lead that will need to connected. To control the tower speaker's illuminated color and "light show", you must purchase MB Quart's N1-RC remote control (049N1RC, sold separately). The N1-RC remote control communicates with the tower speaker via RF, so you don't need direct line of sight. The N1-RC remote offers the following control functions.
- Power: Lights On or Off
- Memory: Goes back to the last setting
- Mode: Scroll up & down through dynamic light show modes
- Color: Scroll up & down for solid light colors
- Bright: Control the brightness of the LED illumination
Note: The tower speaker features a pre-programmed demo mode, if not using the optional remote.
1 question already asked