About the MB Quart NHT1C-116LB
Power (and light) for your tower
Power (and light) for your tower
MB Quart's NHT1C-116LB marine tower speakers bring outstanding power and performance to your ski boat or ATV. You'll find a compression horn for massive sound, built-in LED lights for style, and a marine-rated design that ensures that the party will go on and on. Designed for boating or powersports applications, these powerful full-range 6-1/2" tower speakers combine outstanding audio performance with outdoor-ready reliability. They'll also fit a wide variety of bar sizes.
Super-cool LED lights
LED lights on a tower or roll bar are both cool and practical. These speakers give you practically limitless color choices, and you can enjoy steady light, a strobe effect, or programmed "light shows" – the choice is yours. You'll need MB Quart's N1-RC remote (sold separately) to control the lighting system and to sync multiple LED speakers.
Compression horn design
Compression horn designs dramatically improve speaker efficiency. And this is the fun kind of efficiency – it means it takes less amp power to produce more usable volume throughout the frequency spectrum. In other words, you can crank these speakers up and hear it all – highs, lows, and mids.
Quality components for impressive performance
The 1" titanium dome tweeters, polypropylene cones, and built-in compression horns give you smooth response and seriously impressive volume. The voice coil is made from high temperature copper and wound on a Kapton former, so it's light, powerful, and durable. These speakers are vented front and rear, so air passes through the spider and the back plate to exchange air over the voice coil. As a result, they stay cool when they're being pushed hard. There's also a built-in crossover, so you'll hear a smooth transition between high and low frequencies – not irritating distortion.
Built tough to rock hard
These MB Quart tower speakers will perform in extreme conditions, with water-resistant components and super-strong composite baskets, magnet covers and grilles. The exterior surfaces are UV-resistant and ready to withstand broiling sunlight. Inside, the crossover network is conformal-coated to protect against fresh and salt water spray, not to mention dust and sand. In fact, your MB Quart speakers are IPX67-rated, which means they meet the highest standards of weather resistance.
Your speaker comes with a die-cast, powder-coated mount that will resist sun, spray and dust. You'll also get a centering ring and 11 mounting hardware options that fit bars from 1-1/2" to 2-3/4".
More about MB Quart
Three decades of marine and powersports audio expertise goes into MB Quart audio gear. These rugged, high-quality receivers, speakers, amps, and subs provide great sound and rugged, all-weather reliability. The MB Quart "Life Shield" badge means your gear has been designed and tested to stand up to the toughest conditions on the water or off the beaten path.
- 6-1/2" compression horn marine tower speakers (pair)
- designed for wake towers and rollbars
- built-in LED lighting
- coincident-mounted compression horns
- 1" titanium dome tweeters
- polypropylene woofers with Butyl rubber surround
- water-resistant aramid fiber spiders
- front and rear cooling system
- IPx67 certified for marine use
- lightweight composite frames
- UV- and salt water-resistant
- power range: 2-75 watts RMS (150 watts peak power)
- frequency response: 30-24,000 Hz
- impedance: 4 ohms
- sensitivity: 92 dB
- includes centering ring and 11 mounting hardware options from 1-1/2" to 2-3/4"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # NHT1C-116LB
What's in the box:
- 2 Wake tower speakers (attached 7" speaker wire)
- Mounting bracket w/ 4 screws (pre-installed)
- 2 Metal bracket adapters
- 18 Two-piece rubber adapters
- 2 One-piece rubber adapter
- 4 Butt-connectors
- Quick Start Installation Guide
- Mounting clamp label sheet
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
MB Quart NHT1C-116LB reviews
Thanks for submitting your review
More details on the MB Quart NHT1C-116LB
Features & specs
|Tweeter Design||1" Horn-loaded dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
92 dB at 1 watt |
|Frequency Response||30 - 24k Hz|
|Max RMS Power Handling||75|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||N/A|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
Marine & Powersports Tower Speaker: The NHT1 marine and powersports tower speaker is designed to sound great while playing very loud in the outdoors on your boat or off-road vehicle. The tower speaker's enclosure is sealed against the elements and features internal steel reinforcement for strength. The tower speaker features water resistant (IPX67) components; including horn-loaded titanium tweeter, polypropylene woofer, and rust-resistant internal connectors.
1" Horn-Loaded Titanium Tweeter: The NHT1 tower speaker features a 1" horn-loaded Titanium dome tweeter which delivers a very smooth musical response and high output with minimal required amplifier power. Thanks to the coincident mounted compression horn, overall volume is improved by as much as +5dB over conventional speakers.
6.5" Polypropylene Woofer: The NHT1 tower speaker features a UV protected, water resistant 6.5" composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame. The woofer's voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight. Its high energy strontium ferrite magnet provides higher output with minimal amplifier power. This woofer design delivers deep bass & high volume while being protected from sun, sand, & water spray.
Wavelength Transparent Acoustic Lens: An integrated Wavelength Transparent Acoustic Lens improves midrange frequencies through the 6.5" polypropylene cone woofer.
Marine Certified Crossover: The NHT1 tower speaker utilizes a conformal coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection.
Injection Molded Enclosure & Grille: The NHT1 tower speaker is built to last with a heavy-duty ABS cast enclosure that features steel reinforcements. This ruggedly design enclosure is sealed to provided better protection from the elements and improved bass response. The speaker frame and integrated grill are also ABS UV protected which will help prevent color fade. The grille is removeable.
Speaker Wire: The NHT1 tower speaker features an attached 7" speaker wire with bare-tinned wire on the other end and comes with two butt-connectors that can be crimped onto your amplifier's speaker wire. The solid black wire is negative, while the black with white stripe wire is positive.
Mounting Options: The included mounting hardware includes practically every conceivable tower and roll-cage size option, so there is no need to purchase extra equipment. Eleven mounting hardware options from 1.5" to 2.75" are included. The mounting hardware are Die-Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust. The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength. The Centering ring allows the speaker to tip left/right when mounted to an arced mount which means regardless of the angle of your tower or roll-cage, the speaker is always straight. Additionally, the NHT1 tower speaker has been engineered to have less of the enclosure hanging below the mount, which means fewer friends & family bumping their heads on the speaker.
Illumination + Optional Remote: The NHT1 tower speaker features built-in variable illumination. There is 12-volt Positive (Red) and Ground (Black) lead that will need to connected. To control the tower speaker's illuminated color and "light show", you must purchase MB Quart's N1-RC remote control (049N1RC, sold separately). The N1-RC remote control communicates with the tower speaker via RF, so you don't need direct line of sight. The N1-RC remote offers the following control functions.
- Power: Lights On or Off
- Memory: Goes back to the last setting
- Mode: Scroll up & down through dynamic light show modes
- Color: Scroll up & down for solid light colors
- Bright: Control the brightness of the LED illumination
Note: The tower speaker features a pre-programmed demo mode, if not using the optional remote.
4 questions already asked