Chief FTR100

Features

TV Wall-Mount Bracket: The Chief FTR Series FTR100 TV wall-mount bracket is designed for flat panel digital signage and hospitality applications. The FTR100 allows for portrait or landscape mounting and patented Centris technology provides fingertip tilt adjustment  for easy TV positioning and cable access.

TV Capacity: The FTR100 wall-mount bracket is designed to support flat-panel TVs from 10" to 40", weighing up to 45 lbs.

VESA Mount Bolt Pattern: The FTR100 TV bracket consists of two vertical mounting plates that are hinge-connected together. The TV mounting plate includes eight slots that can accommodate a vertical hole spacing of 50mm x 50mm or 100mm x 100mm. The FTR100 comes with M4 size bolts 20mm, 25mm, and 30mm long for mounting the bracket to your TV. The bracket will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:

• 50mm x 50mm
• 100mm x 100mm

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Wall Plate: The FTR100 can either be centered on a single wood stud or anchored to a single wood stud on one side, and to drywall (1/2" minimum thickness) on the other side. The mount can provide ±1/2" of lateral shift by using the mounting holes on either side of the vertical center line holes. Two hollow-wall anchors are provided along with two wood screws.

Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.

Adjustments: The Chief FTR100 allows a mounted TV to be tilted as much as +5° upward, and -15° downward in order to provide the best viewing angle of your wall-mounted TV. Tilting the TV also provides easier access to cable connections on back of the televisions.

Installation Tools: The following tools are recommended for mounting the FTR100 and are not included:

• Tape measure
• Stud finder
• Drill
• 1/8" Drill bit (for wood studs)
• 3/8" Drill bit (for drywall)
• 1/2" Socket wrench
• Philips-head screw driver
• Hammer

Dimensions:

• Wall Plate:
  • Width = 4.878"
  • Height = 4.758" 
• TV Plate:
  • Width = 5.20"
  • Height = 6.353"
• Bracket Depth: 1.88"