About the Sanus Classic MLF13
A tilting, swiveling mount for most TVs
A tilting, swiveling mount for most TVs
The full-range Sanus Classic MLF13 mount gives you plenty of options for positioning your TV. It can hold it just 2-7/8" from the wall, or extend it outward a full 14". You can swivel the TV left or right up to 45° and tilt it up or down as far as 11° for optimal viewing. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. The MLF13 can support a TV with a screen size of up to 80", and a weight of up to 130 lbs.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- fits most flat-panel TVs from 37"-80"
- heavy-gauge steel construction
- supports up to 130 lbs.
- extends TV up to 14" from wall
- swivel range: ±45°
- tilt range: ±11°
- roll range: ±4°
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- conceals cables for a neat on-wall TV installation
- 30-9/16"W x 19-3/4"H x 2-15/16"D (with arm retracted)
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # MLF13-B1
What's in the box:
- Arm assembly
- 2 TV vertical brackets
- 2 TV horizontal brackets
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M5 washers
- Four M6/M8 washers
- Four 5/16" x 2-3/4" lag bolts
- Four 5/16" washers
- Two 5/16"-18 x 1" screws
- 8-32 x 3/8" Locking screw
- 8-32" Washer
- 4 Spacer
- 5 Cable-ties
- 4 Cable-tie holders
- 3/16" Hex-key
- 7/32" Hex-key
- Instruction Manual
Sanus Classic MLF13 reviews
Thanks for submitting your review
More details on the Sanus Classic MLF13
TV Capacity: The Sanus Classic Series MLF13 wall-mount bracket is designed to support flat-panel TVs from 37" to 80", weighing up to 130 lbs.
VESA Bolt Pattern: The Sanus MLF13 wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 100mm-710mm and a vertical hole spacing of 100mm-475mm. The MLF13 comes with M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
- 600mm x 300mm
- 600mm x 400mm
- 700mm x 300mm
- 700mm x 400mm
Full-Motion Design: The Sanus Classic Series MMF13's full-range of movement allows smooth extend, tilt, swivel, pan, and roll motions. The MMF12B extends from the wall (2.9375"-13.9375"), tilts up/down (+/-11°), swivels left/right (+/-45°), pans left/right (+/-90°), and rolls up/down(+/-4°) for easy viewing anywhere in the room.
Perfect Positioning: Your TV can slide from side-to-side on the MLF13 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Construction: The MLF13 bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall-Plate: The wall plate must be mounted to two wall studs (spaced 16" OC) using the included lag bolts and washers.
Wire Management: Cable-ties and cable-tie holders are included to secure your cables to the MMF13's articulating arm assembly.
Installation Tools: The following tools are recommended for mounting the MLF13:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 1/2" Socket wrench
- Screw driver
The Sanus Classic MLF13 replaces these items
Q Crutchfield asked: Why did you buy this?
12 questions already asked