About the Sanus Classic MLT14
A tilt mount for most TVs
A tilt mount for most TVs
The Sanus Classic MLT14 mount features fingertip control so you can easily adjust the tilt without tools. You can tilt the mount up to 5º up, and 10º down. The mount can support TVs with screen sizes from 37”-80" and weighing up to 130 lbs. Once you've secured the brace to the wall, the mount just slides into position. Safety locks that close with audible clicks let you know it's securely in place. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 37"-80"
- supports up to 130 lbs.
- positions TV just 1-15/16" from the wall for a clean appearance
- vertical tilt range: +5° to -10° (may vary with size of TV)
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 27-11/16"W x 18-3/4"H x 1-15/16"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # MLT14-B1
What's in the box:
Sanus Classic MLT14 owner's manual
- Wall-plate
- 2 TV brackets
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M5 washers
- Four M6/M6 washers
- Four 5/6" x 2-3/4" lag bolts
- 4 Lag bolt washers
- 4 Wall-anchors
- 4 Spacers
- Instruction Manual
Reviews
Customer reviews
Loading reviews...
Sanus Classic MLT14 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MLT14
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Wall Mount | |
| Motion | ||
| Tilt | Yes | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | No | |
| Wood Stud (Dual, 16-inch) | Yes | |
| Wood Stud (Dual, 24-inch) | Yes | |
| Concrete Block-compatible | Yes | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Capacity: The Sanus Classic Series MLT14 wall-mount bracket is designed to support flat-panel TVs from 37" to 80", weighing up to 130 lbs.
VESA Bolt Pattern: The Sanus MLT14 wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 50mm-705mm and a vertical hole spacing of 50mm-450mm. The MLT14 comes with M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 50mm x 50mm
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
- 600mm x 300mm
- 600mm x 400mm
- 700mm x 300mm
- 700mm x 400mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Low-Profile: Its low-profile design positions the TV just 1.9375" from the wall for a clean appearance.
Tilting Design: The Sanus Classic Series MLT14 tilting mount gives you the best view of your wall-mounted television from the floor or couch. Innovative technology provides up to 15º (+5°/-10°) of tilt with the touch of a finger, making it easy to reduce glare and improve viewing angles without tools. Tilting the TV also provides easier access to cable connections on back of the television.
Perfect Positioning: Your TV can slide from side-to-side on the MLT14 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Safety Tabs: Once the wall bracket is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear. There is a strap on each TV bracket which allows you to disengage the safety tabs and remove your television from the wall bracket.
Construction: The MLT14 bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall-Plate: The wall plate must be mounted to wall studs spaced 16" or 24" OC. The wall-plate can also be anchored to a solid concrete or concrete block wall. Lag bolts, washers, and wall-anchors are supplied.
Installation Tools: The following tools are recommended for mounting the MLT14:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
The Sanus Classic MLT14 replaces these items
- supports TVs weighing up to 110 lbs.
- holds TV 1-1/4" away from wall
- 3 fixed tilt positions
Loading accessories...
Customer Q&A
5 questions already asked
Loading articles...
Needed to hang my new Samsung 65inch TV. This mount got my attention due to: Ability to hold my TV; Value; Ability to change the viewing angle; Sanus great reputation; other customer reviews; Low profile to the wall.
kiwi from el dorado hills, CA