TV Capacity: The Sanus Classic Series MMT16B wall-mount
bracket is designed to support flat-panel TVs from 32" to 47", weighing up to
VESA Bolt Pattern: The Sanus MMT16B wall-mount bracket
accommodates a horizontal hole spacing on back of the TV of 50mm-405mm and a
vertical hole spacing of 50mm-405mm. The MST16b comes with M4, M5, M6, and M8
size bolts of differing lengths to mount the bracket to your TV. It will
accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 50mm x 50mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Low-Profile: Its low-profile design positions the TV just 2"
from the wall for a clean appearance.
Tilting Design: The Sanus Classic Series MMT16B tilting
mount gives you the best view of your wall-mounted television from the floor or
couch. Innovative technology provides up to 15º of tilt (10º forward/5º
backward) with the touch of a finger, making it easy to reduce glare and improve
viewing angles without tools. Tilting the TV also provides easier access to
cable connections on back of the television.
Perfect Positioning: Your TV can slide from side-to-side on
the MMT16B wall-mount for perfect positioning on the wall. The TV brackets
easily shift left and right on the wall plate to allow perfect TV placement,
even with off-center wall studs.
Safety Tabs: Once the wall bracket is anchored to the wall
studs and the two TV brackets are attached to the back of your television, the
two TV brackets hook into the wall bracket. Integrated safety tabs on the TV
brackets provide a safe and easy connection to the wall bracket you can hear.
There is a strap on each TV bracket which allows you to disengage the safety
tabs and remove your television from the wall bracket.
Construction: The MMT16B bracket is constructed of
heavy-gauge steel with a durable powder-coated black finish. This solid
construction provides strength and increased safety.
Wall-Plate: The wall plate must be mounted to a wall stud or anchored
to a brick, block, or concrete wall using the supplied lag bolts (and
Installation Tools: The following tools are recommended for
mounting the MMT16B:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.