About the Sanus NF18 Speaker Stands
High-performance speakers deserve high-performance stands. From top to bottom, Sanus' latest wood speaker stands combine fine furniture looks with ultra-rigid construction for solid support and optimum sound quality.
Each base and top plate is made of anti-resonant MDF and has a smooth low-luster black finish. Brass speaker studs and neoprene pads are included to isolate the speaker from the top plate. Plastic feet for the underside of the base plate protect wood or tile floors (adjustable carpet spikes also included). A patented concealed speaker wire path on the rounded support pillar keeps cables out of sight. Assembly takes just minutes.
Priced per pair
- black lacquer finish
- stand height: 18"
- top plate measures 7-3/8" x 7-3/8"
- base plate measures 10-1/2" x 11-3/4"
- supports 25 lbs.
- floor spikes to help minimize vibrations
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # NF18B
What's in the box:
- 2 Black base plates
- 2 Black top plates
- 2 Black pillars
- Four 2.25" Base screws
- 4 1.25" Top plate screws
- 8 Nuts
- 8 Spiked feet
- 2 Plastic wire covers
- 8 Brass speaker studs
- 8 Self-adhesive neoprene speaker pads
- 8 Plastic isolation feet (to cover spiked feet)
- 8 Pan-head screws
- Instruction Manual
Sanus NF18 Speaker Stands reviews
Thanks for submitting your review
More details on the Sanus NF18 Speaker Stands
Design: Each base is made of anti-resonant MDF finished with three coats of hand-sanded black lacquer. Adjustable floor spikes are included to provide stable footing on carpeted floors, and to further minimize resonance. A single sturdy black pillar supports the low-profile top plate, which features a choice of neoprene isolation pads or brass isolation studs. Plastic wire covers give your speaker stands a neater look by concealing the wires completely.
Spiked Feet: The spiked feet pierce the carpeting and anchor the stand to the floor, keeping the speaker stable and reducing resonance. With the spiked feet installed, the stand height is adjustable from 17.75" to 18". Note: If you do not wish to use the spiked feet, Sanus has included plastic feet that will not scratch your floor.
Brass Studs: These upward facing brass studs hold the speaker stable and minimize resonance.
Neoprene Pads: The sharp points on the brass studs can scratch the bottom of the speaker. If this is of concern, you can use the supplied neoprene pads to stabilize the speaker.
Weight Capacity: Each speaker stand can support up to 25 lbs.
Top Shelf Dimension: The top shelf is 7-3/8" wide and 7-3/8" deep.
The Sanus NF18 Speaker Stands replaces these items
Q Crutchfield asked: Why did you buy this?
4 questions already asked