Sanus SF34
Crutchfield customer from Brooksville, FL on 1/30/2021
0 of 0 found this helpful
Excellent workmanship and engineering
Craig from Bellevue, WA on 1/17/2021
I was very impressed with these. Excellent workmanship and engineering. Super solid and everything went together perfect.
Pros: Rock solid, does what its supposed to do. I feel like this is very well designed and they have thought of everything needed to successfully use.
Cons: Not height adjustable but you can adjust the speaker base rotation 45 degrees in either direction
0 of 0 found this helpful
Speaker Stands - Surround sound
Crutchfield customer from New York, NY on 1/10/2021
Stylish and less expensive than the manufacturer's - foundation is strong and exactly what we needed for our new surround speakers.
Pros:
Cons:
0 of 0 found this helpful
Sanus SF34
Crutchfield customer from Charlotte, NC on 1/3/2021
Very solid and stable. More stable than I expected, and look great in the corners of my office.
Pros:
Cons:
0 of 0 found this helpful
punisher808
Crutchfield customer from Thompsonville, MI on 12/3/2020
There ok the wire is still visible as the rings that come with it one broke on me just cheap plastic
Pros:
Cons:
0 of 0 found this helpful
Sanus SF34
Crutchfield customer from Saint Louis, MO on 11/30/2020
Beautiful and heavy duty. I adapted them for my Klipsch RP 502s surround speakers by attaching a block of walnut 1" x 3" x 7" ant the ends cut at 45 degrees to match the shape of the speakers. I screwed them in from the bottom an used a 3/8" bolt to secure the speaker. Rock solid. Also, no sand needed.
Pros:
Cons:
1 of 1 found this helpful
Great speaker stands
Crutchfield customer from Columbia, MD on 9/27/2020
Stands look great and feel very sturdy. Just wish there was a little better cable management. The cheap cable management solution provided ripped while taking it out of the box
Pros:
Cons:
0 of 0 found this helpful
Solid build.
Crutchfield customer from San Diego, CA on 6/15/2020
Good height. Worked as described.
Pros:
Cons: Don't actually latch speakers. Just stands. Had to add blutak. Returned for wall mount speakers instead of book shelf.
0 of 0 found this helpful
Sanus SF34
Crutchfield customer from Lakeville, MA on 3/1/2020
I needed a pair of speaker stands tall enough to clear a tall back chaise lounge. I narrowed my choice between two Sanus models , NF36 and the SF34's. Wood vs metal, single post vs double post,36"vs 34". I decided to go with the SF34's. The SF34 stands have a wide base which gives them a strong stance for bookshelf speakers. I have Klipsch "Sixes" sitting on top. At 34" tall the stands are not wobbly at all. I chose not to fill the double posts (not necessary ) because the stands pack some weight behind them. I have read that some have complained that the top plate is on the small side (6"x 6.5") but they are perfect for the "Sixes". These speakers have a built in riser base so the SF34 top plate fits right in the middle. When I'm turning up the volume on these Klipsch Speakers I'm not getting any pinging or any negative feedback from the stands. Thanks again to the customer service reps at Crutchfield for making Sanus the right choice for my application.
Pros: -solid base, wide stance -double post design - wasn't necessary to fill posts (for my application ) - great black finish -quality product
Cons: None
0 of 0 found this helpful
Nice floor stands for surround sounds speakers.
Crutchfield customer from Bend, OR on 5/20/2019
Sturdy speaker stands with the option to use either rubber pad or metal spike for isolation. I am using them for Polk surround sound FXi A6 speaks. The stands bring the speaks to near ear levels for my recliners in my HT setup. I like the fact that they are steel with wire guide that help's conceal an manages the wires. Note they conceal not hide the speaker wire. They sit pretty well except I wish I had some mechanical way to connect the speaker to the stand. But that a speaker issue(no holes in the bottom of speaker) an not the Sanus SF34 since the SF34 has the option to use speakers studs or bolts. I am using the rubber isolation pads. Note...I did have one of the bolt hole on each of the base that would not match up with any of the plastic feet (hardware list "E")supply with the stands. I couldn't get the pan head bolts(hardware list "B") to screw in an secure the plastic feet. I am not planning on moving the stand so I should be good. I am wondering if anyone else is seeing this problem with the plastic feet. This issue occurred on both stands.
Pros: Sturdy, wire guide for cable management, metal or rubber feet for isolation on the bottom of stands, reasonable price
Cons: Cable management....wish they had internal placement for hiding speaker cables.
0 of 0 found this helpful
Sanus SF34
Ron from Missoula on 4/3/2019
Very good stands heavy duty if your looking for stands these are the cats meow
Pros:
Cons:
0 of 1 found this helpful
Sanus SF34
Crutchfield customer from Berwyn, IL on 2/8/2019
0 of 0 found this helpful
Nice stands
Kevin from Fishers, IN on 9/27/2018
These are very nice and heavy. I am using the stands to hold Klipsch 502 surrounds
Pros: Nice weight , sturdy
Cons: Lousy directions. Cable management could be better. Easy to correct.
0 of 0 found this helpful
Tall stands for bookshelf speakers
Crutchfield customer from Norfolk, CT on 9/11/2018
After a little initial difficulty in reading the instructions, the speaker stands assembled without undue trouble and are very solid. They are excellent bases for my NHT bookshelf speakers. The reason I bought these particular stands was so that the speakers could be positioned behind my living room couch and elevated above the level of couch. These are tall enough to do the job.
Pros:
Cons:
1 of 1 found this helpful