Swivel Wall-Mount for Curved TVs: The Sanus VLC1-B1 swivel wall-mount
bracket was designed specifically for use with today's curved LED-LCD & OLED
TVs. This mount was engineered with 10° of
swivel left and right of center, the ideal viewing range is increased by 20°
compared to having a curved TV on a stand or fixed wall-mount. By
mounting your curved TV, you can make more than just one seat in your room the
perfect seat to get the immersive curved TV experience.
TV Capacity: The Sanus VLC1-B1 wall-mount bracket is
designed to support curved LED-LCD & OLED TVs from 40" to 88", weighing up to
VESA Bolt Pattern w/ M8 Hardware: The Sanus VLC1-B1
wall-mount bracket will accommodate the following VESA hole patterns in
accordance with industry standards set by the Video Electronics Standards
- 400mm x 400mm (using M8 hardware)
- 600mm x 400mm (using M8 hardware)
Note: This wall-mount bracket only comes with M8 hardware.
Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer washers
or spacers. These additional accessories can often be found at your local
Perfect Positioning: The Sanus VLC1-B1 allows height, level,
and side-to-side adjustments after installation for perfect positioning of your
curved TV on the wall.
Steel Construction: The VLC1-B1 swivel wall-mount bracket
bracket is constructed of heavy-gauge steel with a durable powder-coated black
finish. This solid construction provides strength and increased safety.
Safety Tabs: Once the wall-plate is anchored to the wall
studs and the TV bracket is attached to the back of your curved television, the
TV bracket hooks into the wall-plate. Integrated safety tabs on the TV bracket
provide a safe and easy connection to the wall-plate you can hear. There are two
straps on the TV bracket which allow you to disengage the safety tabs and remove
your curved television from the wall-plate.
Cable Management: The VLC1-B1's open wall-plate design allows you to
easily route cables behind your curved TV and accommodate a standard size
electrical outlet. Wire ties are included to help tidy up your TV's wires and
16" or 24" OC: The VLC1-B1's wall plate must be mounted to
wall studs or anchored to a brick, block, or concrete wall using the supplied
lag bolts (and wall-anchors). The slots in the wall plate can accommodate a
variety of stud spacing, allowing you to easily mount the VLC1-B1 to wall studs
that are 16" or 24" on center.
Installation Tools: The following tools are recommended for
mounting the VLC1-B1:
- Stud finder/Level tool (included)
- Tape measure
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Wall Plate:
- Width =
- Height =
- Depth = 0.5"
- TV Brackets:
- Width = 25.375"
- Height =
- Depth = 2.3125"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.