Full-Motion Design: The Sanus Premium Series VLF510
full-motion, wall-mount bracket provides a 3-points of movement for an optimal
viewing position. The VLF510 extends from the wall (1.375"-10"), tilts up/down
(+0°/-10°), and swivels left or right (+/-30°) for easy viewing anywhere in the
TV Capacity: The Sanus Premium Series VLF510 wall-mount
bracket is designed to support flat-panel TVs from 51" to 80", weighing up to
VESA Bolt Pattern: The VLF510 full-motion, wall-mount
bracket accommodates a horizontal hole spacing on back of the TV of 145mm-730mm
and a vertical hole spacing of 25mm-420mm. The Sanus VLF510 comes with M4,
M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It
will accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 200 x 100, 200 x 200, 200 x 300, 200 x 400
- 300 x 100, 300 x 200, 300 x 300, 300 x 400
- 400 x 100, 400 x 200, 400 x 300, 400 x 400
- 500 x 100, 500 x 200, 500 x 300, 500 x 400
- 600 x 100, 600 x 200, 600 x 300, 600 x 400
- 700 x 200, 700 x 300, 700 x 400
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer washers
or spacers. These additional accessories can often be found at your local
Heavy-Duty Construction: The bracket is constructed of heavy-gauge
steel and high-impact plastic with a durable powder-coated black finish.
Perfect Positioning: The TV brackets and arm assembly let
your television slide from side-to-side on the wall-mount plate for perfect
positioning of the TV on your wall. There are also two level adjustment screws
on the TV bracket to raise or lower (+/-2°) the sides of the TV.
Note: The wall plate must be mounted to wall studs or
anchored to a block or concrete wall using the supplied lag bolts
(and wall-anchors). The slots in the wall plate can accommodate wall studs
16" and 24" on center.
Decorative Covers & Cable Management: The VLF510 has a finished
appearance with a decorative cover that conceals assembly and mounting hardware.
With its cable management guide, the VLF510 keeps loose cables organized,
creating a clean appearance without compromising TV movement.
Installation Tools: The following tools are recommended for
mounting the VLF510:
- Tape measure
- Stud finder
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Phillips-Head Screw driver
- Width = 32.25"
- Height = 20.375"
- Depth = 1.375"-10.3125"
- Articulating Wall-Bracket:
- Width = 32.25"
- Height = 19.1825"
- Depth = 1.375" - 10.3125"
- TV Brackets:
- Width = 1.4375"
- Height = 20.25"
- Depth = 1.125"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.