About the Sanus Premium Series VML5
The Premium Series Sanus VML5 fixed position mount is a great choice if you simply want to install your TV flat against the wall. This slender mount holds your TV just 1-1/4" away from the wall, and it can support a TV with a screen size up to 50" and weighing up to 75 lbs.
Sanus' ClickStands hold your mounted TV out at an angle, making cable connections easy.
Safe and simple mounting
The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall, to level it, or even change the height. A safety lock that closes with an audible click lets you know the TV bracket is securely in place.
A handy ClickStand at the bottom of each vertical brace swings out so you can temporarily prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 40"-50"
- supports up to 75 lbs.
- mount holds TV approximately 1-1/4" from wall
- built-in ClickStands temporarily hold mounted TV out from the wall for easier cable connections
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- 21-1/4"W x 10-3/4" to 18-3/4"H x 1-1/4"D
- warranty: 10 years
- Our 60-day money-back guarantee
- MFR # VML5-B1
What's in the box:
Sanus Premium Series VML5 owner's manual
- 2 TV brackets
- Wall bracket
- Four M4 x 30mm bolts
- Four M5 x30mm bolts
- Four M6 x 35mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- 4 Spacers
- Four 5/16" x 3-1/2" lag-bolts
- 4 Wall-anchors
- Stud-finder/level
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
Reviews
Customer reviews
Loading reviews...
Sanus Premium Series VML5 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Premium Series VML5
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Fixed | |
| Motion | ||
| Tilt | No | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | No | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | No | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
Fixed-Position: The Sanus Premium Series VML5 fixed-position wall-mount bracket is perfect for viewing your wall-mounted flat-panel TV at eye level.
TV Capacity: The Sanus Premium Series VML5 wall-mount bracket is designed to support flat-panel TVs from 40" to 50", weighing up to 75 lbs.
VESA Bolt Pattern: The VML5 wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 100mm-400mm and a vertical hole spacing of 200mm-400mm. The Sanus VML5 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The VML5 bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.
Perfect Positioning: Your TV can slide from side-to-side on the VML5 wall-mount for perfect positioning on the wall. There is also a level adjustment screw on top of either TV bracket to raise or lower the sides of the TV.
Note: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate wall studs 16" on center.
Safety Tabs: Once the wall bracket is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear.
Click Stands: Built-in ClickStands on each TV bracket temporarily hold your mounted TV out from the wall for easier cable connections.
Installation Tools: The following tools are recommended for mounting the VML5:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
Dimensions:
- TV Brackets:
- Width = 3.0625"
- Height = 10.75"-18.875"
- Depth = 1.0"
- Wall Plate:
- Width = 21.25"
- Height = 5.0625"
- Depth = 0.5625"
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
I was looking for the cheapest mounting bracket and this was in the Outlet section, so it was even cheaper. It holds the TV securely and it was inexpensive, so mission accomplished.
Mike from Leawood, KS