About the Sanus Premium Series VMT5
The Sanus Premium Series VMT5 tilt mount features fingertip control so you can easily adjust the tilt without tools. The mount can support TVs with screen sizes from 40" to 50" and weighing up to 75 lbs.
The mount lets you tilt your TV up for easy cable connections.
A safe design for mounting
Once you've secured the brace to the wall, the mount just slides into position. Safety locks that close with audible clicks let you know it's securely in place. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- designed for TVs 40"-50"
- supports up to 75 lbs.
- vertical tilt range: +7° to -12° (may vary with size of TV)
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 23-1/4"W x 17-11/16"H x 2-1/4"D
- warranty: 10 years
- Our 60-day money-back guarantee
- MFR # VMT5-B1
What's in the box:
- 2 TV brackets
- Wall bracket
- Four M4 x 30mm bolts
- Four M5 x30mm bolts
- Four M6 x 35mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- 4 Spacers
- Four 5/16" x 3-1/2" lag-bolts
- 4 Wall-anchors
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
More details on the Sanus Premium Series VMT5
Tilting Design: The Sanus Premium Series VMT5 tilting mount gives you the best view of your wall-mounted television from the floor or couch. You'll be able to tilt your TV from -7° to + 12° in order to give you a better viewing angle of your wall-mounted TV; tension knobs tighten the bracket in place. Tilting the TV also provides easier access to cable connections on back of the television.
TV Capacity: The Sanus Premium Series VMT5 wall-mount bracket is designed to support flat-panel TVs from 40" to 50", weight up to 75 lbs.
VESA Bolt Pattern: The VMT5 tilting wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 100mm-500mm and a vertical hole spacing of 100mm-400mm. The Sanus VMT5 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
Note: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate wall studs 16" on center.
Construction: The VMT5 bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.
Perfect Positioning: Your TV can slide from side-to-side on the VMT5 wall-mount for perfect positioning on the wall. There is also a level adjustment screw on top of either TV bracket to raise or lower the sides of the TV.
Safety Tabs: Once the wall bracket is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear.
Installation Tools: The following tools are recommended for mounting the VMT5:
- Tape measure
- Stud finder/level (included)
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- TV Brackets:
- Width = 2.3125"
- Height = 17.6875"
- Depth = 2.125"
- Wall Plate:
- Width = 23.25"
- Height = 7.25"
- Depth = 0.875"
Q Crutchfield asked: Why did you buy this?
2 questions already asked