About the Sanus VSF415
The articulated arm holds your TV up to 15-1/2" from the wall.
The Sanus Premium Series VLF415 makes it simple to wall-mount and precisely position your flat-panel TV. This full-motion bracket can support TVs with screen sizes from 13" to 39" and weighing up to 60 lbs. The articulated arm extends your TV up to 15-1/2" out from the wall. The mount lets you swivel your TV from side to side, and you can also tilt it up or down for optimal viewing. The mount's hollow arm lets you thread cables through it, keeping them out of sight and free from tangles.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 13"-39"
- supports up to 60 lbs.
- articulating arm positions TV up to 15-1/2" away from wall
- vertical tilt range: +15° to -15° (may vary with size of TV)
- swivel range: +90° to -90°
- in-arm wire channel conceals cables without inhibiting movement
- stud-mounting required
- 11-1/4"W x 11-3/4"H x 3-1/2"D (up to 15-1/2" with arm extended)
- warranty: 10 years
- Our 60-day money-back guarantee
- MFR # VSF415-B1
What's in the box:
- TV bracket
- Arm assembly/wall-plate
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M6 x 12mm bolts
- Four M6 x20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 12mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Eight M4 washers
- 4 M6/M8 washers
- Four M4 spacers
- Four M6/M8 spacers
- Two 5/16" x 2-3/4" lag bolts
- 2 Lag bolt washers
- 2 Anchors
- 4 Covers
- Pivoting pin
- 1/4"-20 x 3-1/4" Mounting bolt
- Four 8-32 x 1/2" screws
- Large washer
- 2 Small washers
- Nut
- Thin spacer
- Magnetic stud finder/level
- 2 Cable covers
- 4 Wire-ties
- 5/32 Hex key
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
Featured review
I bought two of these - one for the bedroom where my Samsung usually hangs, and one for my deck bar. It easily lifts off the mounting pin and carried outside where I set it on the pin and plug in the cable line. Piece of cake
Cris from Pennsylvania
Customer Q&A
Q
Going to mount a new 32 inch tv and taking my old one down. Do I just take out the 4 screws on the back to take down old tv?
A
Remove one allen screw on the top part of the arm and pull straight up and the whole thing comes off. Very easy
12 reasons to shop with us
#8
Hands-on product research
The most accurate info around.
REVIEWS
Customer reviews
Loading reviews...
Sanus VSF415 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Sanus VSF415
Product Research
Features
Full-Motion Design: The Sanus Premium Series VSF415 full-motion, wall-mount bracket provides a 4-points of movement for an optimal viewing position. The VSF415 extends from the wall (3.25"-15.5"), tilts up/down (+/-15°), and swivels left or right (+/-90°) for easy viewing anywhere in the room. The bracket can also be rotated 90° to the left or right for landscape or portrait viewing.
TV Capacity: The Sanus Premium Series VSF415 wall-mount bracket is designed to support flat-panel TVs from 19" to 40", weighing up to 50 lbs.
VESA Bolt Pattern: The VSF415 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole spacing of 75mm-200mm. The Sanus VSF415 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.Wall Plate: The wall plate must be mounted to a wall stud or anchored to a solid concrete or concrete block wall using the supplied lag bolts (and wall-anchors).
Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.
Cable Management: Two small plastic covers and four wire ties provide cable management along the wall-plate/arm assembly.
Installation Tools: The following tools are recommended for mounting the VSF415:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
- Pencil
Dimensions:
- TV Bracket:
- Width = 9.125"
- Height = 9.375"
- Depth = 2.5625"
- Arm/Wall-Plate Assembly (retracted):
- Width = 2.375" (7.625" w/ arm)
- Height = 6.8125" (7.375" w/ arm)
- Depth = 1.75"
- Overall:
- Width = 11.25"
- Height = 11.8125"
- Depth = 3.25"-15.5"
The Sanus VSF415 replaces these items
- full-motion bracket for flat-panel TVs weighing up to 60 lbs.
- extends up to 9-1/4" away from wall
- tilt range: +15° to -15°; swivel range +15° to -15°
- for TVs up to 27-37" and 60 lbs.
- articulated arm holds TV up to 15-1/2" from wall
- swivel range: 45° left and right; tilt range: +15° up and down
- designed for flat-panel plasma and LCD TVs from 15"-37" and up to 60 lbs.
- tilt range: +15° to -15°
- swivel range: 90° left to 90° right
Loading accessories...
Customer Q&A
5 questions already asked
Loading articles...
