About the Sanus WSS1
The Sanus WWS1 speaker stand was designed for a Sonos Play:1 or Play:3 speaker. It comes with three different brackets. One for a Play:1 speaker, and two for the Play:3, so you can mount it in either a horizontal or vertical position.
The stand's hollow post lets you run cables through it, preserving a clean, uncluttered appearance. And the base comes with both rubber isolation pads for hardwood floors and carpet spikes to ensure the stand sits stably on a carpet or rug.
- for Sonos Play:1 and Play:3 speakers
- Play:3 speaker can be oriented horizontally or vertically
- hollow stand column for cables
- stand height: 34"
- base plate measures 10" x 13"
- carpet spikes to help minimize vibrations on floor coverings
- rubber isolation pads to help minimize vibrations on hardwood floors
- not compatible with the Sonos One powered speaker
- warranty: 60 days
- Our 60-day money-back guarantee
- MFR # WSS1-B1
What's in the box:
- Upright tube
- Play:1 bracket
- Play:3 vertical bracket
- Play:3 horizontal bracket
- Top collar
- Bottom collar
- 1/4"-20 x 3/4" Screw
- 1/4"-20 x 5/8" screw
- 1/4"-20 x 3/8" screw
- Lock washer
- 4 Rubber isolation pads
- 4 Carpet spikes
- 4 Hex-nuts (for spikes)
- Felt pad
- Instruction Manual
Sanus WSS1 reviews
Thanks for submitting your review
More details on the Sanus WSS1
Compatibility: The Sanus WSS1-B1 speaker stand is designed to work with both the Sonos Play:1 and Play:3 speakers (sold separately). The stand positions the Sonos speakers at the speaker manufacturer's recommended angle for accurate dispersion and securely support the speaker for optimum bass response.
Horizontal or Vertical Mounting: The Sanus WSS1-B1 speaker stand mounts the Sonos Play:1 speaker vertically. It can mount the Sonos Play:3 speaker either vertically or horizontally. The WSS-B1 comes with three different mounting plates based on the the type of Sonos speaker and the orientation you will be mounting the speaker.
- Sonos Play:1 Bracket: measures 2.625" (w) x 2.6875" (h) x 3.75" (d)
- Sonos Play:3 Vertical Bracket: measures 3.375" (w) x 2.8125" (h) x 4.25" (d)
- Sonos Play:3 Horizontal Bracket: measures 4.0625" (w) x 2.625" (h) x 4.5" (d)
Note: These brackets mount to the stand's post using a 1/4"-20 x 5/8" screw and then to your Sonos speaker using a 1/4"-20 x 3/8" screw. A felt pad is placed between the bracket and the bottom the Sonos speaker.
Wire Management: The speaker stand's column and base have wire channels to conceal cables. The wire channels are large enough to route and conceal your Sonos speaker's power and Ethernet cables.
Rubber or Spike Feet: The Sanus WSS1-B1 speaker stand comes with both rubber and spike feet to accommodate different flooring. The rubber feet should be used on hardwood, laminate, and tile flooring. The spike feet should be used on carpeted flooring. Both types of feet screw into the bottom of the stand's base.
Note: The rubber feet add approximately 0.25" to the overall height of the stand. The spike feet add approximately 0.375" to the overall height of the stand.
Tools Required: All you'll need is a phillips-head screwdriver to assemble the speaker stand and to mount your Sonos speaker to the stand.
3 questions already asked