Sanus WSSBM1-B2 Sound Bar Mount for Sonos Beam

Its great. Installing it can be a bit of a pain. You have to take off your current mount, put this one on and then put the other mount over it. Also, it comes with a ton of screws, but unfortunately they were either too short or too long with my set up, so I had to go buy a medium sized screw length. So other than that, its great.

Pros:

Cons:

I was looking forward to getting my Sonos Beam off of the floor and mounted to the TV. The mount did not have the correct screw lengths for my TV (Samsung NU 6070). Had to but 60mm M8 screws from Amazon. The Sanus L-bracket that attaches the Sonos Beam to the mount ended up blocking I/R sensor so that my remote control did not work. Needed to remove one of mounting screws and rotate the Sonos Beam about 15 degrees on the L-bracket to unblock I/R sensor. Good news is that the Sonos Beam is attached to the mount (although it is only held on be a single screw). It looks silly though because it is cock-eyed on the bracket. Called Sanus Customer Service who said this should not be happening. The I/R sensor block is a major design flaw.

Pros: Mount keeps Sonos Beam off of the floor Handle moves the sound bar up and down

Cons: Poor L bracket design (blocks I/R sensor of Sonos Beam) Does not include screws long enough to secure mount to TV

Crutchfield response on 2/19/2019 Paul contacted our Customer Support team and set up a return. Purchases from Crutchfield can be returned or exchanged within 60 days.

It took me a little bit to figure it out, but it fit my TV and mount perfectly and works great. I wish the arms were adjustable because it did makes some of the inputs on the back of the TV unusable. Not a huge issue. Very happy and recommend.

Pros:

Cons:

So simple! All parts and super simple instructions. Works seamlessly with the sonos speaker and is invisible from the front. I want to try it with another center channel speaker in another room GREAT PRODUCT! Way to go Sanus

Pros: Exceptional product and super easy to install.

Cons: Get help removing replacing the large TVs from the mount!

Works very well. It would be nice to offer a greater variety of spacers to get it to fit on most TVs. I have purchased two for Samsung TVs and each requires a different setup requiring more spacers.

Pros:

Cons:

Works well and easy to install. I like that it hides all the wires. We had hid all the wires for our TV when mounting it on the wall, and this Sanus mount is the perfect way to add a Sonos Beam without messing with the fung shui.

Pros: - Easy to install - Hides wires - Adjustable

Cons: - Sonos Beam seems to be at slightly different angle than TV

Decided to mount my Sonos Beam with an bracket onto the television instead of using the Sonos wall mount. The Sanus unit came with all the necessary hardware and excellent directions, making the installation quick and easy. The integrated system looks highly professional.

Pros: Simple to follow instructions and ample hardware. Integrates nicely with tv monitor.

Cons: Not applicable.

This is a great quality mount and a perfect fit for the Sonos Beam. It also quite was easy to install (taking less than 20 minutes). I would highly recommend this mount for your Sonos beam.

Pros:

Cons:

Easily the best must for the SONOS beam on the market today.

Pros: Ease of use and instructions

Cons: None

Perfect product for what I was looking for as a replacement TV stands.

Pros:

Cons:

Does the job and can be snuggled up under the TV so no cords show at all.

Pros: Works fine

Cons: None to speak of

Brought this to more easily mount my Sonos Beam. The installation was easy, and I like the simple adjustment design. This worked great on our original stationary mount, but it is even better on an articulating setup which we now have. Simple, follow the leader mounted design allows us to direct our TV and Beam based on viewing position (left/right/up/or down).

Pros: Clean, Simple mechanics

Cons: None

I bought and installed a full motion Sanus TV mount for my 65inch TV but haven't installed this sound bar mount just yet. Once I purchase the Sonos Beam I will give another review but I am confident that this will bolt on great and look sweet once installed.

Pros:

Cons:

This sound bar mount is perfect for my new Beam. It was very easy to install and works with pretty much any mount. In fact, my TV mount wasn't even a Sanus one. It includes all the necessary hardware and looks great because you can easily adjust its distance from the bottom of the TV to get it real flush and hide all the cords. I also like how it rotates with the TV if you have a full motion mount. Personally, I like it much better than the Sonos mount for the Beam.

Pros: Universal, includes all the stand-offs you need, and easy to install.

Cons: