About the Sanus WSSE12
Sturdy stands for your Era 100 speakers
Sturdy stands for your Era 100 speakers
These sturdy stands were designed to seamlessly match Sonos Era 100 speakers. They hold your Era 100s a little more than 34" off the floor, positioning the speakers roughly at ear level (when you're seated). Built-in tracks let you conceal power cords for an uncluttered appearance.
Easy assembly
Each stand can be assembled in about 15 minutes with just a Phillips head screwdriver. They come with rubber feet for bare floors and carpet spikes for covered floors. The stands give you full access to the speakers' ports and controls. They're made of durable steel for durability with wide bases for stability.
Product highlights:
- 2 fixed-height stands for use with Sonos Era 100 speakers
- allows access to all ports and controls
- easy 15-minute assembly (per stand)
- built-in track for cable management
- steel construction
- includes rubber feet for wood floors, and carpet spikes for covered floors
- 12-3/4"W x 34-3/8"H x 10"D (each)
- weight: 7.44 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # WSSE12-W2
What's in the box:
- 2 Upright posts
- 2 Bases
- 2 Speaker brackets
- 2 Top brackets
- 2 Top collars
- 2 Bottom collars
- 8 Rubber pads
- 8 Carpet spikes
- 8 Nuts
- Two M5 x 14mm screws
- Two 1/4-20 x 5/8" screws
- Two 1/4"20 x 3/4" screws
- Two 10-24 x 3/8" screws
- 2 Lock-washers
- Instruction Manual
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus WSSE12
Features & specs
| Number of Stands Included | 2 | |
| Stand Type | Floor | |
| Compatibility | Sonos Era 100 | |
| Height | 34.5625 | |
| Weight Capacity | 5 | |
| Base Dimensions | 12.75 x 10.0 | |
| Top Plate Dimensions | 4.25 x 4.125 | |
| Materials | Steel | |
| Adjustable | No | |
| Wire Management | Yes | |
| Fillable | No | |
Product Research
Features
Sanus Speaker Stand for Sonos Era 100: This Sanus speaker stand is designed specifically for the Sonos Era 100 speaker (sold separately), providing the ideal platform and optimal listening height. The Sonos Era 100 speaker secures to the Sanus stand using the included bracket and M5x14mm screw.
Note: The speaker stand can be purchased individually or in pairs.
Steel Construction: The Sanus Speaker Stand for Sonos Era 100 is constructed of durable steel that not only resists wear, but also perfectly complements the aesthetics of the Sonos Era 100 for a sleek, seamless look. Its sturdy, oversized base helps prevent tipping in any direction. The stand is available in a black or white finish to match your Sonos Era 100 speaker and your room's decor.
Cable Management: For a cable-free look, the Sanus Speaker Stand for Sonos Era 100 features an oversized upright post that the speaker's power cord and audio cables can be passed through.
Rubber or Spike Feet: The speaker stand comes with both rubber and spike feet to accommodate different flooring. The rubber feet should be used on hardwood, laminate, and tile flooring. The spike feet should be used on carpeted flooring. Both types of feet screw into the bottom of the stand's base.
- Dimensions with Rubber Feet: 12.75" (w) x 34.5625" (h) x 10.0" (d)
- Dimensions with Spike Feet: 12.75" (w) x 34.6875" (h) x 10.0" (d)
Tools Required: All you'll need is a phillips-head screwdriver to assemble the speaker stand and to mount your compatible Sonos speaker to the stand. Sanus estimates an assembly time of approximately 15 minutes.
Loading accessories...
Customer Q&A
Loading articles...
