About the Sanus WSSE32
Sturdy stands for your Era 300
Sturdy stands for your Era 300
These [r]ugged stands were designed to seamlessly match Sonos Era 300 speakers. They hold your speakers 32-5/16" off the floor, positioning them roughly at ear level (when you're seated). Built-in tracks let you conceal the power cords for an uncluttered appearance..
Easy assembly
Each stand can be assembled in about 15 minutes with just a Phillips head screwdriver. They come with rubber feet for bare floors and carpet spikes for covered floors. The stands give you full access to the speakers' ports and controls. They're made of durable steel for durability with wide 10-15/16" x 11" bases for stability.
Product highlights:
- 2 fixed-height stands for use with Sonos Era 300 speakers
- allows access to all ports and controls
- easy 15-minute assembly (per stand)
- built-in track for cable management
- steel construction
- includes rubber feet for wood floors, and carpet spikes for covered floors
- 10-15/16"W x 32-5/16"H x 11"D (each)
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # WSSE32-B2
What's in the box:
- 2 Pillars
- 2 Bases
- 2 Speaker brackets
- 8 Isolation pads
- 8 Carpet spikes
- 2 Release triggers
- 8 Cable-management clips
- Six M5x12mm screws
- Four M6x20mm screws
- 8 Jam nuts
- 4 Lock-washers
- Instruction Manual
Reviews
Customer reviews
Loading reviews...
Sanus WSSE32 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus WSSE32
Features & specs
| Number of Stands Included | 2 | |
| Stand Type | Floor | |
| Compatibility | Sonos Era 300 | |
| Height | 32.5 | |
| Weight Capacity | 10 | |
| Base Dimensions | 10.9375 x 11.0 | |
| Top Plate Dimensions | 4.3125 x 4.9375 | |
| Materials | Steel/Aluminum | |
| Adjustable | No | |
| Wire Management | Yes | |
| Fillable | No | |
Product Research
Features
Sanus Speaker Stand for Sonos Era 300: This Sanus speaker stand is designed specifically for the Sonos Era 300 speaker (sold separately), providing the ideal platform and optimal listening height. The Sonos Era 300 speaker secures to the Sanus stand using the included bracket and M5x12mm screws.
Note: The speaker stand can be purchased individually or in pairs.
Steel & Aluminum Construction: The Sanus Speaker Stand for Sonos Era 300 is constructed of durable steel and extruded aluminum that not only resists wear, but also perfectly complements the aesthetics of the Sonos Era 300 for a sleek, seamless look. The stand is available in a black or white finish to match your Sonos Era 300 speaker and your room's decor.
Cable Management: The speaker stand features Sanus Press Fit cable management technology that secures cords and cables down the integrated channel on back of the stand for a neat and professional looking installation.
Rubber or Spike Feet: The speaker stand comes with both rubber and spike feet to accommodate different flooring. The rubber feet should be used on hardwood, laminate, and tile flooring. The spike feet should be used on carpeted flooring. Both types of feet screw into the bottom of the stand's base.
- Dimensions with Rubber Feet: 11.0" (w) x 32.5" (h) x 11.0" (d)
- Dimensions with Spike Feet: 11.0" (w) x 32.75" (h) x 11.0" (d)
Tools Required: All you'll need is a phillips-head screwdriver to assemble the speaker stand and to mount your compatible Sonos speaker to the stand. Sanus estimates an assembly time of approximately 15 minutes.
Loading accessories...
Customer Q&A
Loading articles...
Easy setup and is not massive so it blends in to room. Sturdy. Not cheaply made and puts these great speakers at the right height. ENJOY!!
Marc from Orleans, MA