About the Boston Acoustics GT-RSL
This GT-RSL remote subwoofer level control from Boston Acoustics eliminates the problem of varying bass levels in your music selections. The dash-mount knob connects to your Boston Acoustics GT Series amplifiers with its 13-foot cable so you can adjust the sound from the front seat of your car. Not a bass boost, this controller adjusts the level of your sub amplifier so you'll get consistent bass tones no matter what the volume. Warranty: 1 year.
What's in the box:
- Rotary subwoofer level control with attached 13.35' flat cable (with a male RJ-45 plug on the end)
- Control PC board (with RJ-45 jack)
- Cover plate
- 2 Self-tapping screws (length=1/2")
- 2 Self-tapping screws (length=3/8")
- Installation Instructions
Thanks for submitting your review
More details on the Boston Acoustics GT-RSL
Overview: The GT-RSL is an optional accessory that allows you to remotely adjust the subwoofer level of a compatible Boston Acoustic GT-series amplifier, relative to the main speaker system. This allows you more control and flexibility from the listening position.
VCA: The GT-RSL uses a VCA or voltage-controlled amplifier to vary the level of the subwoofer. Changes in the voltage level effect the output level of the subwoofer. No audio signal is sent to the controller, therefore, noise cannot be injected into the system from an external source.
Installation: The GT-RSL includes a Controller PC Board, which plugs into a port on compatible GT amplifiers, and provides an RJ-45 jack on the front panel of the amp. The 13.25' (4 meter) RSL cable plugs into the RJ-45 jack and the controller unit mounts under the dash, within easy reach of the listening position. For a flush installation, a 5/16" diameter hole should be drilled and the knob and attachment nut removed before pushing the shaft through the hole. After installation, the supplied new cover plate should be installed over the amp port.
Compatibility: The GT-RSL is compatible with the following Boston Acoustics GT-series amplifiers: