Contact us
Close contact box

RetroSound Monterey M2

Digital media receiver for select 1949-62 Ford and Mercury vehicles — does not play CDs

Item # 068MONTM2

Got a vintage 1949-1962 Ford or Mercury vehicle that needs a little audio help? RetroSound's Monterey...

Read more from Crutchfield writer, Dave D.

Find what Fits your car

Ships from manufacturer

See the installation gear

$329.99

About the RetroSound Monterey M2

Made for your classic Ford

Got a vintage 1949-1962 Ford or Mercury vehicle that needs a little audio help? RetroSound's Monterey M2 digital media receiver matches the look and fit of the factory radio in your vehicle, yet provides Bluetooth® for hands-free calling and audio streaming, a USB port for digital media, and inputs for other portable music players in your classic ride. This receiver's made specifically for the original radio layout in your Ford, so it'll give you that look of yesteryear and deliver modern features.

Made for your classic Ford

Got a vintage 1949-1962 Ford or Mercury vehicle that needs a little audio help? RetroSound's Monterey M2 digital media receiver matches the look and fit of the factory radio in your vehicle, yet provides Bluetooth® for hands-free calling and audio streaming, a USB port for digital media, and inputs for other portable music players in your classic ride. This receiver's made specifically for the original radio layout in your Ford, so it'll give you that look of yesteryear and deliver modern features.

Hands-free calling and digital sound

You can use built-in Bluetooth to talk hands-free or stream audio programming from your smartphone to the receiver, and you can also plug a USB thumb drive loaded with your music into the rear USB port. You'll find two auxiliary inputs on the rear of the receiver for other sources, like a portable satellite radio or hi-res audio player

Added goodies

The Monterey M2 receiver features two sets of preamp outputs that make it easier to add amps and subs to stand out at the next car show. For some customization, you can choose from 32,000 backlight colors so the LCD display will look just right in your dash. This RetroSound receiver also offers excellent AM/FM reception, as well as three EQ presets and a loudness control to tweak your sound.

Make it a complete RetroSound system

Wanna add some serious power to your ride? RetroSound offers strong amplifiers to get the most impact out of your speakers and subwoofer. They also make low-profile car speakers that fit into a wide range of older cars and trucks, so you can be sure that your sound system will do justice to your vintage vehicle.

Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.

This digital media receiver will not play CDs.

READ LESS

Product highlights:

    General Features:
    • digital media receiver designed for classic 1949-62 Ford and Mercury vehicles (no built-in CD player)
    • built-in Bluetooth for hands-free calling and audio streaming
    • LCD display with 32,000 backlight color choices
    Audio Features:
    • plays MP3, WMA, and FLAC music files from USB drive
    • AM/FM tuner with 18 FM/12 AM presets
    • 3-band EQ (bass, midrange, treble)
    • 3 EQ presets plus loudness adjustment
    Expandability:
    • inputs: dual rear auxiliary inputs; one rear USB port
    • outputs: 4-channel preamp outputs (2.85-volt front, rear/subwoofer)
    Other Features and Specs:
    KEEP READINGREAD LESS

    What's in the box:

    • Radio body (M2)
    • Display face
    • 2 Infinimount shafts (with 11" harness attached to each one)
    • Microphone w/ bracket (attached 8'cable terminated by 3.5mm connector)
    • Main harness
    • Power harness
    • Speaker harness
    • 2 InfiniMount brackets
    • 2 InfiniMount control face brackets
    • 4 Bracket mounting screws
    • 4 Face mounting screws
    • 10 Large machines screws
    • 4 Small machine screws
    • 12 Large hex-nuts
    • Medium hex-nut
    • 4 Small hex-nuts
    • 3 Lock-washers
    • 8 Large flat-washers
    • 8 Small flat-washers
    • 2 Large spacers
    • 2 Small spacers
    • Large self-tapping screw
    • Small self-tapping screws
    • Rear-support stud
    • Backstrap
    • Rubber boot
    • User's Manual
    • Quick Start Guide
    • "STOP" note

    Customer reviews

    We don't have any reviews, yet.
    Submit a review and then enter to win a $350 rewards card.
    Be the first to review this product

    Loading reviews...

    Verified customer (What's this?)
    Verified employee purchase (What's this?)

    Pros:

    Cons:

    Crutchfield response

    More details on the RetroSound Monterey M2

    Product Research

    Shaft-Style Radio
    Variety of Sources
    Audio Section

    Shaft-Style Radio

    Vehicle Compatibility: The RetroSound Monterey (M2) radio is designed to work in select classic Ford & Mercury vehicles, including the following -

    • Ford:
      • 1949-50 Deluxe
      • 1951 Wagon
      • 1951-52 "F" Series Truck
      • 1960-61 Fairlane
      • 1960-62 Falcon
      • 1960-62 Galaxie
    • Mercury:
      • 1961 Meteor
      • 1961-62 Comet
      • 1961-62 Monterey (M2)

      Note: Knob set and push-buttons available separately.

    Infinimount System: The Monterey (M2) radio features RetroSound's Infinimount System. In this design, the shaft knobs and the display face are not permanently mounted to the unit, but instead connect to the unit via a harness so you can space the radio's shaft knobs at various distances from the chassis of the radio, as well as mount the face independently from the chassis body using the supplied mounting brackets.

    Variable-Color LCD: The RetroSound Monterey (M2) features variable color illumination display with over 32,000 of color variations. Choose from a selection of preset colors, have the unit scan through all preset color continuously, or customize your own color to better match your vehicle's interior lights. You can also adjust the brightness of the display to High or Low.

    Variety of Sources

    Built-in Bluetooth: The RetroSound Monterey (M2) is equipped with built-in Bluetooth (HFP/A2DP/AVRCP) allowing you to make and receive phone calls wirelessly through the receiver; as well as stream music wirelessly from your Bluetooth-enabled smartphone to the head unit. Before using your Bluetooth enabled device, it must be paired to the Monterey (M2). You can only pair one device at a time with this unit. Once paired, when your Bluetooth device is in close proximity to the RetroSound receiver, the auto connection function automatically connects the two units. The Monterey (M2) is compatible with most Bluetooth enabled mobile phones, including the Apple iPhone & Android smartphones.

    • Hands-Free Communication: The Monterey (M2) allows for wireless communication between the head unit and your Bluetooth enabled cell-phone. You can answer an incoming call from the head unit's front-panel control knobs. Incoming phone call information will be displayed on the unit's front-panel LCD and your music will be pause or muted. You will still use your phone to dial a phone number and then the call will transfer to the RetroSound radio. Use the included external microphone to speak into during your phone conversation, while the other party will be heard through your vehicle's speakers.
    • Wireless Audio Streaming: The Monterey (M2) also allows you to play back stored music and  music apps from your Bluetooth-enabled phone or personal music player using a paired Bluetooth connection. Playback controls included Play/Pause, Stop, & Next/Previous Track. This unit does not display song/artist information from Bluetooth audio devices.
    Note: Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, function improperly, or may not support all features when used with the RetroSound Monterey (M2).

    USB Port: The RetroSound Monterey (M2) features a USB (type-A) port connected to its rear chassis by a 40" pigtail. The USB port enables connection of  a portable USB mass-storage class (MSC) device; such as a USB thumbdrive. Once you've connected your compatible USB device, the unit will find your songs instantly and automatically start playing them. This unit supports MP3 (128 kbps +), WMA (64 kbps +), and FLAC music files in format FAT and FAT32. The unit can recognize a maximum of 999 songs/files (files will be read in order of creation and not alphabetically or numerically).

    • Controls: You will be able to control basic playback functions of your music files such as Play, Pause, Skip Track, Intro Scan, Repeat Track, and Random.
    • Display: The receiver also supports ID3-tags/WMA-tags for song/artist information. 
    • Charging: USB portable audio players that can be charged via USB will be charged when plugged into the receiver's USB port (max. 0.5A), and the vehicle's ignition switch is set to ACC or On.
    Notes:
    • Not compatible with Apple iOS and Android mobile devices.
    • You cannot connect a USB device via a USB hub or Multi-Card Reader to this unit.

    Dual Auxiliary Inputs: The universal shaft-style receiver features two 3.5mm auxiliary inputs connected to the rear chassis by 7" pigtails. The Aux inputs provide a connection for portable external audio sources such as a MP3 player or  CD player.

    AM/FM Tuner: The Monterey (M2) features a built-in RDS AM/FM tuner. The unit's tuner features 3 FM bands and 2 AM bands. A total of 30 AM/FM presets can be stored manually or automatically. Select between Local and Distant settings can aid in listening to weak FM radio stations or compensate for stations that have too strong of a signal. This unit's tuner can be set to USA or European tuning.

    Audio Section

    25W x 4Ch MOSFET Amplifier: The Monterey (M2) is equipped with a 25 watts x 4-channel RMS/45watts x 4-channel Peak MOSFET amplifier.

    4Ch/2.85V RCA Outputs: The shaft-style receiver features features 4 channels (Front & Rear) of 2.8V RCA outputs.

    Subwoofer Control: When the subwoofer RCA output is active, you can adjust the output level (0-12) of the sub output. You can also set the low-pass crossover to 80, 120, or 160Hz.

    Equalizer: The Monterey (M2) features the following preset EQ curves (Classic, Pop, Rock, or Off) to customize your music listening. The Off mode activates a 3-Band EQ which lets you adjust Bass, Midrange, & Treble manually from -7 to +7.

    Balance & Fader Control: The Balance adjustment function allows you to adjust or pan the stereo sound from the left or right; this is helpful to compensate for the position of the driver in relation to the speaker locations. Adjustment range is 0 to 12. The Fader Control allows you to fade the sound from the front pair of speaker to your rear pair of speakers. Adjustment range is 0 to 12.

    Turn-On Volume: You can set the Monterey (M2) to power-on to the same volume level (0-46) every time, or let it default to the last volume when turned off.

    Key Beep: When this function is enabled, every knob turn or button press will output a beep tone.

    Loading accessories...

    Customer Q&A

    Loading articles...

    Looking for more?

    Check out the next model in this lineup.


    Adding...
    RetroSound Monterey M4
    Digital media receiver for select classic Ford and Mercury vehicles — does not play CDs
    $429.99
    Add to cart

    Add more audio options to your Ford or Mercury

    The RetroSound Monterey M4 offers these features:
    • compatible with SiriusXM satellite radio tuner
    • iPod/iPhone direct control and charging via USB input
    • 2-year warranty
    TOP