About the RetroSound R-652N
A vintage fit
A vintage fit
RetroSound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but RetroSound builds their speakers from the ground up, using the latest techniques and materials.
Each R-652N 6-1/2" speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The Mylar dome tweeter broadcasts detailed highs without sounding shrill, and its low profile helps increase installation options.
Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. 6-1/2" speakers first appeared in the doors or rear deck of many 80's vehicles. Replace them with these up-to-date RetroSounds, and your tunes will sound new again, just like your classic ride.
Free speaker grilles
You'll get a free pair of matching speaker grilles (a $20 value) when you purchase these R-652N RetroMod™ 6-1/2" 2-way car speakers.
Grilles are not included; the factory grilles should be suitable for most applications.
Priced per pair
- 6-1/2" 2-way speakers (pair)
- pulp composite woofer cone with Santoprene surround
- Mylar dome tweeter
- power range: 2-50 watts RMS (100 watts peak power)
- frequency response: 52-21,000 Hz
- sensitivity: 87 dB
- top-mount depth: 1-3/4"
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # R-652N
What's in the box:
RetroSound R-652N owner's manual
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- Two 12' Lengths of speaker wire
- Eight 1-1/8" Self tapping screws
- 8 Speed clips
- Owner's manual
RetroSound R-652N reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the RetroSound R-652N
Features & specs
|Speaker Size||6 1/2|
|Woofer Composition||Pulp Composite|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||52 - 21k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||1 3/4|
|Bottom-mount Depth (Inches)||1 15/16|
|Cutout Diameter or Length (inches)||5 5/8|
|Mounting Height (Inches)||0.284|
Woofer: The speakers feature rigid pulp composite cone woofers with Santoprene surrounds. The woofers use Neodymium magnets to achieve their shallow depth, so they fit in tight factory locations.
Tweeters: The tweeters are low profile Mylar domes.
Grilles: Two metal mesh grilles are included. The grilles come with plastic grille rings.
2 questions already asked
made a good choice speakers sound crisp
Bob from Rch Cucamonga, CA