About the RetroSound RPOD6A-62
Where no speaker has gone before
Where no speaker has gone before
You've got a classic vehicle that needs some music in it, but your vehicle didn't include factory speaker locations, and there's no room behind the factory panels for installing new speakers. Enter RetroSound's RetroPod panels.
Simple installation
The RetroPod RPOD6A-62 surface-mount speaker system lets you choose the locations for new speakers in your vehicle. The package includes two RetroPod panels with a pair of S-62 6-1/2" speakers. You install a 6-1/2" speaker in each panel, then mount the panels on your kick panels, doors, rear deck, or any suitable flat surface. Complete the job by running some speaker wire to your car stereo or amplifier. You can paint or carpet the ABS plastic panels to match your interior. The speakers also include grilles to complete the installation.
What this Pod's packin'
The included RetroSound S-62 speakers feature a 6-1/2" woofer with a treated foam surround for durability in the face of extreme temperature swings in your car. A Mylar tweeter adds in clean, crisp highs. The speaker handle up to 25 watts RMS, so you'll hear get satisfying performance from these speakers whether you're powering them with a factory radio or a small outboard amplifier.
Installation note: Using the template that RetroSound provides in the panels, you'll need to cut and file mounting holes in the panels for the included speakers. You'll also need to drill mounting holes for screws that secure the speakers. You'll want to consider professional installation if you don't have the proper tools, such as a small reciprocating saw or a Dremel® tool.
Product highlights:
- two RetroPod speaker panels with S-62 6-1/2" speakers
- pulp-composite woofer cone with foam surround and Mylar tweeter
- handles up to 25 watts RMS (50 watts peak power)
- frequency response: 58-21,000 Hz
- sensitivity: 87 dB
- paintable rugged ABS plastic
- mesh grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # RPOD6A-62
What's in the box:
- 2 Speaker pods
- Two 2-Way speakers
- 2 Grilles
- Speaker wire
- 8 Screws
- 8 Speed clips
- Owner's manual
Reviews
Customer reviews
Loading reviews...
RetroSound RPOD6A-62 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the RetroSound RPOD6A-62
Product Research
Features
RetroSound Pods: These RetroSound surface-mount speaker modules are an easy way to add sound to almost any vehicle. The pods are made of ABS plastic and will mount to any flat surface (kick panel, door, rear package tray, etc.). They can be painted or covered to match your vehicle's interior. The angled design directs sound towards the listener.
Note: The included speakers do not come pre-installed; they must be wired and mounted.
Two-Way Speakers: The included speakers are RetroSound model S-62:
- Tweeters: low profile Mylar domes
- Woofer: rigid pulp composite cone woofers
Dimensions:
- Height: not including approximately ½" for the speaker
- Front Edge: 1.64"
- Back Edge: 2.44"
- Diameter:
- Top: 7.12"
- Base: 9.22"
The RetroSound RPOD6A-62 replaces these items
- pulp-composite woofer cone with foam surround and Mylar tweeter
- handles up to 25 watts RMS (50 watts peak power)
- paintable rugged ABS plastic
Loading accessories...
Customer Q&A
Loading articles...
