Contact us
Close contact box

Axxera AXT25R

1" ring dome tweeters

Item # 070AXT25R

Find what Fits your car

In Stock
$29.99 pair

About the Axxera AXT25R

Competition-level tweeters

Planning a competition audio system on a budget? We made a special purchase of some Axxera extreme performance speakers that'll save you some serious money while giving you the SPL you're looking for. Their Axxera AXT25R 1" ring dome tweeter will bring exceptional detail to your high-powered system. Enhanced with a ferro fluid-cooled voice coil and a neodymium magnet, the distinctively smooth sound of this silk dome tweeter is sure to impress. Axxera includes a Mylar capacitor to use as an inline high-pass filter, or you can use their AXT4C crossover.

Product highlights:

  • 1" ring silk dome tweeters (pair)
  • handles up to 100 watts RMS (500 watts peak)
  • frequency response: 2,800-50,000 Hz
  • impedance: 4 ohms
  • sensitivity: 90 dB
  • flush and angled mounting options included
  • top-mount depth: 15/16"
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # AXT25R

What's in the box:

  • 2 Tweeters (each with 18" Wire attached)
  • 2 Threaded locking rings (installed)
  • Four 25mm M4 Stud bolts
  • Eight M4 Nuts
  • 2 Rear mounting brackets
  • Specifications printed on the box

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 rewards card.
Be the first to review this product

Loading reviews...

Verified customer (What's this?)
Verified employee purchase (What's this?)



Crutchfield response

More details on the Axxera AXT25R

Product Research


Installation: These tweeters can be flush mounted, or surface mounted at one of three angles (flat or approximately 45° or 60°). When flush mounting, the mounting surface is clamped between the flange and threaded locking ring. When surface mounting, two stud bolts are inserted into each tweeter housing in one of the three positions, then the rear mounting brackets are placed behind the mounting surface.

Tweeter Dimensions:

  Flush Mount Surface Mount Angled Surface Mount (60°) Angled Surface Mount (45°)
Mounting Height 0.3" 1.223" 1.38" 1.57"
Mounting Depth 0.923" 0.54" (stud depth) 0.54" (stud depth) 0.54" (stud depth)
Frame Diameter 2.283" 2.283" N/A N/A
Cutout Diameter 1.875" N/A N/A N/A
Frame Width N/A N/A 2.283" 2.283"
Frame Depth N/A N/A 2.247" 2.077"

Crossover: A capacitor 3.3μF is wired in-line with the included speaker wire as a first order high-pass crossover. The crossover point using the capacitor is approximately 12 kHz. Optimally, the capacitor should be removed and an electronic crossover used.

2-Year Warranty: Although you might install them yourself, all Crutchfield customers benefit from Axxera's 2-year professionally installed warranty.

Loading accessories...

Customer Q&A

Loading articles...